Jayden7676 Member 78 Member For: 2y 8m 18d Posted 23/01/25 05:46 AM Share Posted 23/01/25 05:46 AM I swaped over the f6 , done all internals to engine all was well to first drive, is making a out the gate noise from front left side , I don't think I can attach file of it as it's to big but do you have a fb I can send it to or something try get a diagnostic on it ? Sounds like if you put a bottle in spokes on a push bike not quite as Loud as that but sounds like a duller version of that. When car is stationary can rev it with no abnormal sounds , as soon as I'm moving under load it does it , Have raised it of the ground and put in drive and it has not made the noise atall smooth as butter, applied hand brake and making a wicked knock from rear left and side brake , brembo chances it's shuttering through the car due to abs working its job? Only happens after 2krpm while driving on the road Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,181 Member For: 16y 9m 20d Gender: Male Location: Melbourne Posted 23/01/25 06:12 AM Share Posted 23/01/25 06:12 AM ABS sensor or something relevant to the handbrake operations on that rear left brake system. 1 Link to comment Share on other sites More sharing options...
Jayden7676 Member 78 Member For: 2y 8m 18d Posted 24/01/25 03:25 AM Author Share Posted 24/01/25 03:25 AM So looked at brakes isn't them. Still making the noise https://youtube.com/shorts/MHIQG-TzDLE?feature=share Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,181 Member For: 16y 9m 20d Gender: Male Location: Melbourne Posted 24/01/25 03:57 AM Share Posted 24/01/25 03:57 AM so it still does it elevated with the handbrake applied? localised the sound to the rear-left for sure? Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro...tbh ;) 8===} Gold Donating Members 16,083 Member For: 10y 1d Gender: Male Location: South Australia Posted 24/01/25 05:37 AM Share Posted 24/01/25 05:37 AM (edited) Check the wheel nuts are tight. If you run it on a dyno, not flat out obviously, you will be able to see what is making the noise. Will only cost a couple hundred tops. Edit: sounds like it is the plastic inner guard rubbing Edited 24/01/25 05:41 AM by Puffwagon My balls Link to comment Share on other sites More sharing options...
Jayden7676 Member 78 Member For: 2y 8m 18d Posted 25/01/25 02:53 AM Author Share Posted 25/01/25 02:53 AM Found it was a bolt in subframe completely missing went and got one and nipped it up , sound gone. Was the rear left so was definitely that side just wasn't the brakes as first thought stoked its sorted what a blody project that's been. Running great now no codes ect. New turbo and fule system on the way hope to make 450 then cert , exciting Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,181 Member For: 16y 9m 20d Gender: Male Location: Melbourne Posted 25/01/25 02:58 AM Share Posted 25/01/25 02:58 AM good stuff to find the culprit 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now