Jayden7676 Member 81 Member For: 2y 11m 14d Posted 23/01/25 05:46 AM Share Posted 23/01/25 05:46 AM I swaped over the f6 , done all internals to engine all was well to first drive, is making a out the gate noise from front left side , I don't think I can attach file of it as it's to big but do you have a fb I can send it to or something try get a diagnostic on it ? Sounds like if you put a bottle in spokes on a push bike not quite as Loud as that but sounds like a duller version of that. When car is stationary can rev it with no abnormal sounds , as soon as I'm moving under load it does it , Have raised it of the ground and put in drive and it has not made the noise atall smooth as butter, applied hand brake and making a wicked knock from rear left and side brake , brembo chances it's shuttering through the car due to abs working its job? Only happens after 2krpm while driving on the road Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/ Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,434 Member For: 17y 16d Gender: Male Location: Melbourne Posted 23/01/25 06:12 AM Share Posted 23/01/25 06:12 AM ABS sensor or something relevant to the handbrake operations on that rear left brake system. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/#findComment-1725445 Share on other sites More sharing options...
Jayden7676 Member 81 Member For: 2y 11m 14d Posted 24/01/25 03:25 AM Author Share Posted 24/01/25 03:25 AM So looked at brakes isn't them. Still making the noise https://youtube.com/shorts/MHIQG-TzDLE?feature=share Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/#findComment-1725447 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,434 Member For: 17y 16d Gender: Male Location: Melbourne Posted 24/01/25 03:57 AM Share Posted 24/01/25 03:57 AM so it still does it elevated with the handbrake applied? localised the sound to the rear-left for sure? Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/#findComment-1725449 Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,300 Member For: 10y 2m 28d Gender: Male Location: South Australia Posted 24/01/25 05:37 AM Share Posted 24/01/25 05:37 AM (edited) Check the wheel nuts are tight. If you run it on a dyno, not flat out obviously, you will be able to see what is making the noise. Will only cost a couple hundred tops. Edit: sounds like it is the plastic inner guard rubbing Edited 24/01/25 05:41 AM by Puffwagon My balls Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/#findComment-1725450 Share on other sites More sharing options...
Jayden7676 Member 81 Member For: 2y 11m 14d Posted 25/01/25 02:53 AM Author Share Posted 25/01/25 02:53 AM Found it was a bolt in subframe completely missing went and got one and nipped it up , sound gone. Was the rear left so was definitely that side just wasn't the brakes as first thought stoked its sorted what a blody project that's been. Running great now no codes ect. New turbo and fule system on the way hope to make 450 then cert , exciting Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/#findComment-1725453 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,434 Member For: 17y 16d Gender: Male Location: Melbourne Posted 25/01/25 02:58 AM Share Posted 25/01/25 02:58 AM good stuff to find the culprit 1 Link to comment https://www.fordxr6turbo.com/forum/topic/97381-f6-swap-to-na-chasi/#findComment-1725456 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now