Seears Member 7 Member For: 13y 7m 20d Gender: Male Location: Canberra Posted 11/09/24 01:55 AM Share Posted 11/09/24 01:55 AM (edited) Hey guys, I did a few searches and couldn’t find anything with the same issue. Last night I was taking out the turbo intake pipe and saw that the low beams were on and turned off by themselves. It’s not on the auto setting. Sometimes just the passenger side would come on and then both for a while and then off again. They keep intermittently doing that but not always just the one side, not really any pattern to it. I pulled the low beam relay out and still the problem persists. I disconnected the negative from the battery last night and then reconnected this morning but it had already drained so it doesn’t have enough charge to start. I’ve bought some new globes but I don’t see how they would be the issue if they still light up. Video is showing the issue: the lights are switched off but the passenger side turning on and then me switching the low beams on and then to off to show they both stay on. To confirm at the end of the video the lights are switched off. Has anyone had the same issue or have any ideas? Hope I’ve posted to the correct area. Cheers guys IMG_0298.mp4 Edited 11/09/24 01:57 AM by Seears Link to comment Share on other sites More sharing options...
Seears Member 7 Member For: 13y 7m 20d Gender: Male Location: Canberra Posted 11/09/24 05:38 AM Author Share Posted 11/09/24 05:38 AM I had forgotten that about 2 years ago I have swapped from the mk1 headlights to mk2 with the wiring kit to fit H7 bulbs. Remembered that just now and have removed the two 15 amp fuses in that wiring which has stopped them coming on but still have the issue as now I have no low beam. Thinking it has got something to do with the added wiring from the swap. Link to comment Share on other sites More sharing options...
greasemonkey Member 79 Member For: 6y 11m 3d Posted 21/09/24 07:10 AM Share Posted 21/09/24 07:10 AM I would say it is an earthing issue somewhere in the circuit, either with the wires that you needed for the Mk2 swap or something else. When electrical stuff isn't earthed properly or its integrated to other components in a car, funny stuff happens. I don't think it is your light switch stalk. I'd recommend just going back to stock so all the headlights work. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now