El Andrew Gold Donating Members 2,036 Member For: 9y 8m 23d Gender: Male Location: Canberra ACT Posted 27/01/24 10:34 AM Share Posted 27/01/24 10:34 AM Thanks for that. Yeah I did ask the exhaust place to locate it higher up on the pipe but they didn't. Was 5 years ago and the sensor has lasted so no big deal.But funny enough the narrow band sensor closer to the turbo craps itself every 12m or so. Link to comment Share on other sites More sharing options...
Nick_is_not_sus Member 70 Member For: 1y 3m 12d Gender: Male Location: New Zealand Posted 01/02/24 07:15 AM Author Share Posted 01/02/24 07:15 AM having trouble finding a trans but an auto wrecker can and dropped some parts of at work and said they have a few zf6s but no turbo ones.. theres one from a G6E its stamped with 1068 010207 .... mines 1068 010208 looks similar just curious I my valve body/mech will go on and my torque converter onto the input shaft just to keep me mobile till I can get my mine rebuilt Link to comment Share on other sites More sharing options...
hjtrbo Bronze Donating Members 320 Member For: 13y 11m 26d Posted 01/02/24 08:15 AM Share Posted 01/02/24 08:15 AM On 27/01/2024 at 12:08 PM, Puffwagon said: Have either of you guys ever looked at a ZF box? The trans case is one piece ie the bellhousing isn't separate. I presumed that was a given. OP, I presume you're talking about a 6hp19 or 21 box? Link to comment Share on other sites More sharing options...
Nick_is_not_sus Member 70 Member For: 1y 3m 12d Gender: Male Location: New Zealand Posted 01/02/24 09:04 AM Author Share Posted 01/02/24 09:04 AM nope the box I can get is a zf6hp26 its made in germany I'm suare the 199 and 21 are made in china and stamped on the castings? this 010207 is the box I am looking at getting Link to comment Share on other sites More sharing options...
hjtrbo Bronze Donating Members 320 Member For: 13y 11m 26d Posted 01/02/24 12:04 PM Share Posted 01/02/24 12:04 PM Good thing it's stamped on the side of the box. You checked it's the same case? (bell housing, I don't know puff what else to call it ) And you were going to swap in your mechatronics? Link to comment Share on other sites More sharing options...
Nick_is_not_sus Member 70 Member For: 1y 3m 12d Gender: Male Location: New Zealand Posted 01/02/24 06:00 PM Author Share Posted 01/02/24 06:00 PM Yeah this is a different box from another g6e, it was tagged with 2009 ford g6e. Yeah. I will use my valve and mechatronics. I only just less than 1000kms ago changed seals, new solenoids and zipkit. Not sure if pair the one that's in it with xtool d8? It will just be a temporary trans while I get mine rebuilt. I'm not confident to build the myself..at work any transmission builds we just send the gearbox away we are to busy for rebuilds. I have another engine I'm getting parts together for this trans won't last .. atomic rods pistons, 274-280/280 kelfords and springs. Head studs 6862 turbo and 2200cc injectors which I and probably going to send back and exchange for 1650cc just a few more bits like pimp gears gaskets and bearings and a donor block and I will be good to go Oh yeah and I just over the weekend put in a PWR intercooler and took the plazmaman out Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now