BF XR6 TURBO OIL IN INTAKE PLENUM

[XRBOY85]

Hi guys 

 

My bf xr6 turbo on E85 has oil in the intake plenum about a spoon full every say few 100kms but is coming from the pcv valve hose that goes to the plenum and has done it since purchased the car upon cleaning it then does it again

 

my plenum is a process west which I removed the top cover to be able to see what is going on 

 

the pcv vacuum hose attached to the bottom/underneath of the plenum nipple as is coming out of the nipple inside the plenum and dripples/pressure out and splashes around but mostly sit running in the corner angle inside the plenum 

 

car runs fine and have done three oil changes on it since owning it over a year or so doing around 7000kms at 151000kms total

 

oil is clean 

 

water/coolant checked is fine 

 

no oil in turbo

 

have changed the pcv valve twice/genuine  plastic ford ones and still does it 

 

could it be a blockage in the PCV system creating a lot of pressure as I have a catch can set up also which was on the car when purchased 

 

have attached a few pics of catch can if its set up ok and pcv hose system ?

 

anyone experienced this type of issue

 

 

 

 

\

 

 

thanks

[Puffwagon]

Running the pcv hose straight to the intake bypasses the catch can and the usual E85 bong water ends up in the intake instead.

 

It was discussed fairly recently so will be at the top of the search results.

[XRBOY85]

had a look in search results but could not find much but will keep looking 

 

thanks

[Puffwagon]

Sixth result down the list