Mox32r Member 34 Member For: 1y 10m 30d Posted 31/03/23 09:31 AM Author Share Posted 31/03/23 09:31 AM Lol I come from owning an R32 gtr and supercharged ls 6.0. I know all about modifications being needed. But the videos I have watched and threads I read lead me to believe it was basically a bolt in affair apart from the compressor housing piping needing to be larger. I absolutely hate this car with a passion and was only upgrading the turbo as it needs to be fixed or replaced to make it easier to sell. You can have them all to your self mate 👍 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,100 Member For: 16y 8m 26d Gender: Male Location: Melbourne Posted 31/03/23 09:58 AM Share Posted 31/03/23 09:58 AM haha upgrading the turbo to sell it? that's some weird logic... but you'll probably love the car if you followed a well-worn pathway of modifications No big deal, if you don't like it, sell it. Link to comment Share on other sites More sharing options...
cat007 Member 236 Member For: 6y 4m 1d Posted 01/04/23 12:36 AM Share Posted 01/04/23 12:36 AM That's with the supplied 45. Although I didn't get the 4"-4" just the supplied 3-4 as I thought I was going to do the battery relocation before I did the turbo. I guess Cutting the 45 back towards the turbo will work, but the return intercooler pipe faces that spot. I feel my choices would be make this work, which would be getting an intercooler that exits on the passenger side and preferably a throttle body relocation to not have to Crossover the engine at all, or put the stocker back on after I rebuild itBend that power steer sensor down.Cut that silicone so the bend is closer to the turbo.Angle it away from engine.Get turbo side battery relocation kit.Don't try and reinvent the wheel. Just do what others have proven to work. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,026 Member For: 9y 11m 7d Gender: Male Location: South Australia Posted 01/04/23 12:41 AM Share Posted 01/04/23 12:41 AM 3 minutes ago, cat007 said: Cut that silicone That silicone is a 3 to 4 inch, it's a throw away for this job. Link to comment Share on other sites More sharing options...
Mox32r Member 34 Member For: 1y 10m 30d Posted 14/11/23 04:10 AM Author Share Posted 14/11/23 04:10 AM Hey guys. Over my litre tantrum with the BA lol. I have decided to go all out with this thing and need to sort out some issues. First off this is the first time I have touched it since about a week after my last post on here. I got to work one morning, drove there fine as normal but when I got to it in the arvo it would not run/idle properly. Like it was running on 3 or 4 cylinders, and when it's doing this the throttle is constantly unresponsive as if it's not even connected. So I got the error codes and they are the same as when it over boosts. Codes p1270 and p2110. But if I start it with my foot on the accelerator it will start and rev up to about 3k then drop to 2k and stay there. Idling at 2k but without any codes at all. Anyone got any ideas? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now