jas98 Member 1,043 Member For: 12y 5m 2d Gender: Male Location: Maryborough Qld Posted 15/05/22 08:39 AM Share Posted 15/05/22 08:39 AM While I was changing the turbo core couple weeks back I seen that I had cracks in all the exhaust housing bolt holes. (as per pic) Besides fact bolts mite loosen (which they were tight) would there be any other issues? There is a couple hairline cracks in wastgate hole area aswell. But yeah any performance issues with the cracks in bolt holes? If so...besides genuine garrett exhaust housings what other brands have people used on a stock tune without issues? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,055 Member For: 16y 8m 15d Gender: Male Location: Melbourne Posted 15/05/22 08:58 AM Share Posted 15/05/22 08:58 AM bolt hole cracks can mean the entire housing could basically catastrophically fail at any point in a heat cycle... not good. Best to replace it with another garrett one as I haven't known any aftermarket ones to be any good. Link to comment Share on other sites More sharing options...
jas98 Member 1,043 Member For: 12y 5m 2d Gender: Male Location: Maryborough Qld Posted 15/05/22 09:04 AM Author Share Posted 15/05/22 09:04 AM Hmm 😕 didn't think that....... Is that a common thing to happen in this situation haha as never seen it before haha Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,055 Member For: 16y 8m 15d Gender: Male Location: Melbourne Posted 15/05/22 09:07 AM Share Posted 15/05/22 09:07 AM over all of the heat cycles, some castings fail at the weaker points so some last for decades, some last a few years, some in between. I haven't heard of major failure, so it doesn't often precipitate as quickly as one might think it would, but it can happen and best to avoid it especially if you're pulling a turbo apart at the time. Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 3m 21d Gender: Male Location: Townsville Posted 18/05/22 12:40 AM Share Posted 18/05/22 12:40 AM I wouldn't be to concerned, I had one of those 6 bolts that continously kept backing out (I assume it's cracked like someone else here has previously said) and when I finally bought some more loctite and just slooged it on I've had no more problems (apart from a missing exhaust manifold to turbine housing bolt missing)... Mild tune on my F6X reference. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now