jas98 Member 1,043 Member For: 12y 5m 2d Gender: Male Location: Maryborough Qld Posted 06/12/21 12:19 AM Share Posted 06/12/21 12:19 AM Hi. On a ba xr6t. The rubber fuel line from the regunalto and main line to 2 steel hard lines at firewall. There 5/16 size however is it possible for me to replace the quick connect fittings with a replacement fitting? I need to replace the rubber hoses asap bit at same time want to do it all and replace the fittings aswell. If so anyone have a link? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,058 Member For: 16y 8m 15d Gender: Male Location: Melbourne Posted 06/12/21 12:23 AM Share Posted 06/12/21 12:23 AM The stock line is fairly "quick connect" as it is... what are you trying to achieve by replacing the fitting? of course fittings can be replaced and put onto both ends, but I don't know why you'd go through such an effort? Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,988 Member For: 9y 10m 26d Gender: Male Location: South Australia Posted 06/12/21 12:26 AM Share Posted 06/12/21 12:26 AM No need to replace the fittings, they can be reused. Just run some efi fuel hose and get a few new efi clamps. Link to comment Share on other sites More sharing options...
jas98 Member 1,043 Member For: 12y 5m 2d Gender: Male Location: Maryborough Qld Posted 06/12/21 12:52 AM Author Share Posted 06/12/21 12:52 AM Thanks guys. Ok I'll most likely reuse them just though while I'm replacing the hose as it's extreamly perished looking...that I'll do the connectors aswell as they have a oring in themmmjust though maybe they perish aswell over time and leak? Link to comment Share on other sites More sharing options...
jas98 Member 1,043 Member For: 12y 5m 2d Gender: Male Location: Maryborough Qld Posted 06/12/21 06:56 AM Author Share Posted 06/12/21 06:56 AM But if I was to change them would these work? https://www.tiperformance.com.au/products/raceworks-female-5-16-plastic-quick-connect-efi-fuel-fitting-to-5-16-barb/ Or https://automotivesuperstore.com.au/raceworks-rwf-715-05-05p?utm_term=RACEWORKS-RWF-715-05-05P&gclid=EAIaIQobChMI1fDQjsvO9AIVoplmAh1S1ggNEAQYAyABEgKAFfD_BwE 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,988 Member For: 9y 10m 26d Gender: Male Location: South Australia Posted 06/12/21 07:07 AM Share Posted 06/12/21 07:07 AM I can't say with 100% certainty they will fit but I'm thinking about the vapour return line under the car and it uses the same style fitting in the steel line there as your link and also the fuel pump swirl pot in and out has the same type and because the fuel pot is plastic and the vapour return is steel I reckon it doesn't matter what type you use so for those reasons I'm 99% sure it might fit Here's some punctuation use it how you see fit ,,,,,, ..... Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 3m 21d Gender: Male Location: Townsville Posted 14/12/21 02:33 AM Share Posted 14/12/21 02:33 AM Ai (Aftermarket Industries) make the quick fits also (plastic only afaik) and they test every single one of them with failures in their manufacturing process... I prefer to keep the standard connections myself instead of using AN but I understand why people use them, especially with the fuel side of things. Dying while on fire would hurt... This clip below generally cheers me up if I'm having a bad day and the dancing knight tops it off at the end! Feel free to delete if it breaches the forum rules. received_417598469409972.mp4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now