It is I Member 37 Member For: 3y 1m 10d Posted 19/10/21 12:03 AM Share Posted 19/10/21 12:03 AM End of the day, I've seen ANTZ on set ups pushing over 450kw and my goal is 320 for now and maaaaybe 400 on e85 in the future so it should be fine for my goals. Plus the cold side is significantly cooler than the hot side so it seems to be working well Just now, bossmang said: he cheaps out on thinner metal to save some bucks. this is a performance design so it's lighter for power to weight gains! 28 minutes ago, TRYME said: The F6 intercooler was slightly larger although general consensus is it's no better then an XR factory cooler. I mean, it's twice the size so I doubt that it's no better... but I wouldn't upgrade from an xr to an f6 cooler, that's for sure. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,991 Member For: 16y 7m 14d Gender: Male Location: Melbourne Posted 19/10/21 12:28 AM Share Posted 19/10/21 12:28 AM 27 minutes ago, bossmang said: its called quality keif. he cheaps out on thinner metal to save some bucks. no , sherlock... as long as it holds the boost and stays connected, who cares how thin it is? Link to comment Share on other sites More sharing options...
TRYME Member 313 Member For: 3y 8m 30d Posted 19/10/21 12:56 AM Share Posted 19/10/21 12:56 AM (edited) 54 minutes ago, It is I said: I mean, it's twice the size so I doubt that it's no better... but I wouldn't upgrade from an xr to an f6 cooler, that's for sure. yea that's what I thought as well but everyone who tunes these things was saying they really ain't much better... surprised me also.. in regards to the antz IC I think it be a good choice if it was under 1000 bucks but for what they charge for it the few hundred extra for PW or Plazzy is the way to go Edited 19/10/21 12:59 AM by TRYME Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,423 Member For: 14y 10m 29d Gender: Male Location: Melbourne Posted 19/10/21 01:52 AM Share Posted 19/10/21 01:52 AM 1 hour ago, k31th said: no , sherlock... as long as it holds the boost and stays connected, who cares how thin it is? I care, it feels cheap and you can tell its made in china when side by side to plazz or nizzy etc. Link to comment Share on other sites More sharing options...
It is I Member 37 Member For: 3y 1m 10d Posted 19/10/21 02:13 AM Share Posted 19/10/21 02:13 AM it's your car so it makes sense. end of the day, it's working well and that's all I care about 1 hour ago, TRYME said: yea that's what I thought as well but everyone who tunes these things was saying they really ain't much better... surprised me also. very surprising! what was ford doing??!! silly buggers 1 hour ago, TRYME said: in regards to the antz IC I think it be a good choice if it was under 1000 bucks but for what they charge for it the few hundred extra for PW or Plazzy is the way to go 100% agree, for another 300 bucks I could have gotten a PW2 Link to comment Share on other sites More sharing options...
Rob70 Silver Donating Members 82 Member For: 4y 7m 14d Gender: Male Location: Wellington, NZ Posted 19/10/21 03:03 AM Share Posted 19/10/21 03:03 AM Wonder who makes the Antz ones...? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 23d Gender: Male Location: Adelaide Posted 19/10/21 03:11 AM Share Posted 19/10/21 03:11 AM Processwest …. 1 Link to comment Share on other sites More sharing options...
It is I Member 37 Member For: 3y 1m 10d Posted 19/10/21 03:13 AM Share Posted 19/10/21 03:13 AM get outta here hahaha surely not! I'm cheering if that's the case, and explains why it's working so well for me ANTZ say they pressure test them for 40psi and I'm not putting that kinda boost into my barra soo.... as long as it cools the air (which it seems to) I'm happy Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 6m 22d Gender: Male Location: Brisbane Posted 19/10/21 04:15 AM Share Posted 19/10/21 04:15 AM The ANTZ is an exact copy of the process west. The boys at ANTZ ripped a process west apart and sent it to their manufacturer for an exact copy. I don't know if the materials are the same but they seem to work fine. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,991 Member For: 16y 7m 14d Gender: Male Location: Melbourne Posted 19/10/21 04:31 AM Share Posted 19/10/21 04:31 AM 2 hours ago, bossmang said: I care, it feels cheap and you can tell its made in china when side by side to plazz or nizzy etc. how often is it going to be side-by-side for you to notice? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now