3Katz Donating Members 121 Member For: 6y 9m 23d Posted 27/01/22 01:40 PM Author Share Posted 27/01/22 01:40 PM No I haven't found the problem unfortunately. I took it to a tuner and we put a set of chassis ears all over the engine and still couldn't determine exactly where the noise is coming from. We replaced the balancer, tightened the cam chain an extra click and no difference. The engines been pulled down twice and everything measures up fine. I've had a clevo before with noisy forgies and I certainly agree that's what it sounds like but on the clevo the rattle went away once they were up to temp. And they all made noise wheras with this, if it is piston slap it sounds like it is just one piston. And it doesn't go away/lessen when hot. Mate I'd be happy to send you a keg of goon, in fact I'd be happy to pay for your flight to and from Bundy, a motel stay and a rum factory tour for you to come and disgnose this lol. 1 Link to comment Share on other sites More sharing options...
Bobs barramundi New Member 3 Member For: 2y 10m 1d Posted 27/01/22 07:43 PM Share Posted 27/01/22 07:43 PM Well 3 Katz my tuner has narrow it down to chain, since Atomic tensioner is ratchet even though its Hydraulic its still ratcheting, my noise only last upto 15 20sec very similar to yours but very faint maybe coz I have loud as exhaust. If you want I know bit of pain change the chain tensioner to factory tensioner and See if the noise still exist. 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,913 Member For: 9y 9m 29d Gender: Male Location: South Australia Posted 28/01/22 01:26 AM Share Posted 28/01/22 01:26 AM Even at operating temp mine would slightly rattle unless I gave it a hiding then it would shutup. I put a 71c thermostat in it when I built it and I reckon if I put a 80+c one in, the noise would go away. Dunno if it would cos I never got around to changing it, but that's what I reckon would happen. 1 Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 4m 28d Posted 28/01/22 11:14 PM Share Posted 28/01/22 11:14 PM I have similar timing chain/tensioner noises. It's pretty common with stiffer valve springs. I wouldn't worry too much 2 Link to comment Share on other sites More sharing options...
3Katz Donating Members 121 Member For: 6y 9m 23d Posted 29/01/22 08:23 AM Author Share Posted 29/01/22 08:23 AM I forgot to mention the Atomic tensioner has been replaced with a factory one already. I have a low temp thermostat in as well - changing it too a higher temp one is a good idea which I'll try. I'm almost at the stage of taking it back to the tunner and just getting into it and seeing what develops. The problem is it's a real nice ute, and sounds like a bucket of sh#t so it's not as enjoyable to drive as it should be. Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 6m 27d Gender: Male Location: Brisbane Posted 29/01/22 10:46 AM Share Posted 29/01/22 10:46 AM My guess is most likely the Atomic timing chain, they can be loud. TBRE won't use them they are huge overkill even for big builds. 1 Link to comment Share on other sites More sharing options...
Bobs barramundi New Member 3 Member For: 2y 10m 1d Posted 29/01/22 11:40 AM Share Posted 29/01/22 11:40 AM 12 hours ago, Tom Tucker said: I have similar timing chain/tensioner noises. It's pretty common with stiffer valve springs. I wouldn't worry too much Nearly everyone I meet with same setup have same problem you on the money mate. Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,751 Member For: 13y 4m 7d Posted 29/01/22 12:07 PM Share Posted 29/01/22 12:07 PM I had the same noise in my motor. Had a atomic chain in it. Might be on the money, or it was something completely different.Done 35k like it and still going so meh 1 Link to comment Share on other sites More sharing options...
Buky-finn New Member 1 Member For: 2y 3m 5d Posted 22/08/22 11:23 AM Share Posted 22/08/22 11:23 AM Have you found the cause of the sound yet? Having a very similar issue built atomic motor stock chain and tensioner though Link to comment Share on other sites More sharing options...
3Katz Donating Members 121 Member For: 6y 9m 23d Posted 22/08/22 01:08 PM Author Share Posted 22/08/22 01:08 PM Not yet, it's got everyone stumped. Went back to the dyno and got all the low speed tuning done but have a wastegate issue to sort before getting stuck into it. Going to ignore the noise for now and see if anything develops 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now