VitaminG Member 25 Member For: 5y 11m 5d Gender: Male Location: Queensland Posted 10/08/21 01:47 AM Share Posted 10/08/21 01:47 AM so I've just installed the Antz turbo side airbox & battery relocation kit. Happy with the way it all turned out. But I'm not a fan of dose so I want to throw the BOV back in and plumb it back to the airbox. I have 2 questions: what kind of 25mm hose do I need? Does it matter?can I just run the hose into the airbox, maybe drill a hole in the side & feed the hose in? I don't imagine the recirculated air is going to be super high pressure. Or for this application, does it need a proper fitting? Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/ Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,402 Member For: 17y 3d Gender: Male Location: Melbourne Posted 10/08/21 01:52 AM Share Posted 10/08/21 01:52 AM 1. No, it doesn't matter. 2. No, it doesn't have to be a fancy connection, just go with whatever method you're comfortable with. If it's not clamped it might pop out every now and then just due to engine vibrations etc. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706689 Share on other sites More sharing options...
VitaminG Member 25 Member For: 5y 11m 5d Gender: Male Location: Queensland Posted 10/08/21 02:04 AM Author Share Posted 10/08/21 02:04 AM Awesome. Thanks for the quick response. I was actually thinking of maybe using an o-ring (so the clamp doesn't scratch up the box) & clamp on the hose inside the box to prevent it popping out. But wasn't sure if pressures might be so great that the clamp would just fly off anyway. Sounds like it should work just fine. Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706690 Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 11m 22d Gender: Male Location: Canberra ACT Posted 10/08/21 07:09 AM Share Posted 10/08/21 07:09 AM I've got the same kit and got a thingo welded onto the metal pipe elbow that the filter attaches to. If you are going to the effort of plumbing back you may as well make it legal.I think I used oil drum hose so it was oil resistant, but in reality there ain't much oil going in there. Was just what I could find that was black. Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706701 Share on other sites More sharing options...
Sean4.0 New Member 21 Member For: 4y 12d Posted 10/08/21 10:47 PM Share Posted 10/08/21 10:47 PM I installed the same kit before I got it tuned. I still ran the BOV and initially loved it. Now after driving it for a while I've reverted back to the original airbox to quieten down the induction noise. Maybe I'm getting old but I find it much more pleasant to drive on longer relaxed drives. Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706717 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,402 Member For: 17y 3d Gender: Male Location: Melbourne Posted 10/08/21 11:05 PM Share Posted 10/08/21 11:05 PM clearly getting old dose for days FTW Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706718 Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 11m 22d Gender: Male Location: Canberra ACT Posted 10/08/21 11:29 PM Share Posted 10/08/21 11:29 PM I found it a bit over the top to start with. So I replaced the middle muffler with a resonator to balance out the induction noise 1 Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706719 Share on other sites More sharing options...
biddie_fiddler [IMPULSIV3] Donating Members 1,374 Member For: 6y 15d Gender: Male Location: Perth, WA Posted 11/08/21 12:20 AM Share Posted 11/08/21 12:20 AM You're definitely not the only person to not be a fan of it. My partner gets annoyed with it when I drive and we're on the road for a long time... But when she gets behind the wheel she'll make it dose every couple minutes. Double standards 🤣🤣 I drive totally different to her too though I suppose Anyway back your thread. I would have no idea how to plumb it back. Of all the FGs I've seen in Perth I have no seen a single one with a plumbed back BOV. If they even have one to begin with, its just dumped to atmosphere. Good luck with the install when you get round to it! Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706722 Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 11m 22d Gender: Male Location: Canberra ACT Posted 11/08/21 12:39 AM Share Posted 11/08/21 12:39 AM These pics give you some idea of how I did mine 2 Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706726 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,402 Member For: 17y 3d Gender: Male Location: Melbourne Posted 11/08/21 12:45 AM Share Posted 11/08/21 12:45 AM hopefully your coolant overflow doesn't get too hot haha Link to comment https://www.fordxr6turbo.com/forum/topic/96357-not-a-fan-of-the-dose/#findComment-1706727 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now