canedkydd Member 56 Member For: 4y 8m 14d Gender: Male Location: Wellington New Zealand Posted 13/01/21 09:04 PM Author Share Posted 13/01/21 09:04 PM Mace hire the tool out for $50 if you buy springs from them and do a decent price on Crow springs as for air into the cylinder not a problem there as I have a compressor and can use a leak down tester. I have ordered springs from Mace. they charge $300 deposit on the tool and refund once you return it. Will post how I got on and how long it took me to do it. Pulling all the necessary parts off now ready to do the job when the springs arrive. Link to comment Share on other sites More sharing options...
canedkydd Member 56 Member For: 4y 8m 14d Gender: Male Location: Wellington New Zealand Posted 04/03/21 08:06 AM Author Share Posted 04/03/21 08:06 AM finally got the time and have done valve springs. not to hard to do just time consuming. fitting Walbro pump in the weekend and 1000cc injectors then the old dog goes in for a tune on Thursday. any predictions what KW they will get out of her. above mods plus cat and middle muffler delete and cai. also slightly bigger cooler. numbers mean nothing to me. only qtr mile times but interesting non the less to see what it will put out bone stock other than cat delete, will be back on the strip on the 20th will post my times Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro...tbh ;) 8===} Gold Donating Members 16,085 Member For: 10y 3d Gender: Male Location: South Australia Posted 04/03/21 08:29 AM Share Posted 04/03/21 08:29 AM 280ish. It depends on how hard they want to push it 1 Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 673 Member For: 5y 7m 2d Posted 04/03/21 08:30 AM Share Posted 04/03/21 08:30 AM Looks great mate. 285kw? She needs some more supporting mods! 1 Link to comment Share on other sites More sharing options...
canedkydd Member 56 Member For: 4y 8m 14d Gender: Male Location: Wellington New Zealand Posted 04/03/21 10:45 AM Author Share Posted 04/03/21 10:45 AM Forgot to say bone stock ran 13.61 @ 105mph. If I get 280kw what's a prediction for quarter mile ? Btr 4 spd Link to comment Share on other sites More sharing options...
cat007 Member 236 Member For: 6y 4m 28d Posted 04/03/21 06:09 PM Share Posted 04/03/21 06:09 PM 280kw should be a mid 12-ish Link to comment Share on other sites More sharing options...
canedkydd Member 56 Member For: 4y 8m 14d Gender: Male Location: Wellington New Zealand Posted 04/03/21 08:00 PM Author Share Posted 04/03/21 08:00 PM would be happy with 12.9 dont want to go faster than my Camaro which runs 12.4 Link to comment Share on other sites More sharing options...
cat007 Member 236 Member For: 6y 4m 28d Posted 04/03/21 09:25 PM Share Posted 04/03/21 09:25 PM I doubt you'll do a 12.4 so don't worry about beating the Camaro I'd be surprised if you don't get faster than a 12.9. I ran a 12.9 on my bone stock (and with larger rims so worse for acceleration) FGX XR6T auto. From my understanding they only make around 220-230rwkw stock. I think you might be lucky to see 12.6 if you get a good launch. Let's see what the dyno comes back with first! 1 Link to comment Share on other sites More sharing options...
canedkydd Member 56 Member For: 4y 8m 14d Gender: Male Location: Wellington New Zealand Posted 04/03/21 10:10 PM Author Share Posted 04/03/21 10:10 PM yeah will be interesting. doing this car for my son to take over and doing on a very small budget only paid $2000 for the car and have done all the work myself. only outside work will be the tune. all up I easily be under $5000 so to run a 12.9 for under $5000 I will be very happy cost me 10 times that to get the Camaro to do 12.4 1 Link to comment Share on other sites More sharing options...
Rob70 Silver Donating Members 82 Member For: 4y 9m 22d Gender: Male Location: Wellington, NZ Posted 05/03/21 06:23 AM Share Posted 05/03/21 06:23 AM Where you getting yr tune done? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now