RegSpec Cruise Control 1,417 Member For: 17y 11m 22d Gender: Male Location: Macksville NSW. Posted 12/12/20 10:54 AM Share Posted 12/12/20 10:54 AM Guys Im running a BF F6 with 4" dump, 6" cat and dual 2.5 exhaust... The H brace that supports the Turbo is buggered and I want to do away with it because its a bitch to get on and off. So I'd like to know if anybody has come up with a better way to support the weight of the front half of the exhaust system? The manifold, turbo and dump adds up to a lot of weight hanging by the manifold studs... I can make a bracket that will hold the system at the back of the cat but thought I'd run it by you guys in case somebody has come up with a better idea? Thanks guys.... Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,043 Member For: 16y 8m 11d Gender: Male Location: Melbourne Posted 12/12/20 11:18 AM Share Posted 12/12/20 11:18 AM Since you already have manifold studs, replace the washers that go on them for nordloc washers and do the same with the exhaust-manifold-to-turbocharger with nordloc too and then they'll stay tight and won't have an issue holding up the weight without the H-brace. I've taken off the H-brace before without bothering to replace the manifold-to-head bolts with studs at all and just done the manifold-to-turbocharger studs/nuts and added nordloc without any issues with sagging etc. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 22d Gender: Male Location: South Australia Posted 12/12/20 11:39 AM Share Posted 12/12/20 11:39 AM I put the factory stuff back and just deal with the pita that it is. It's a pain but that's just part of life hey. I'd expect a workshop to do it properly so yerp Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 17y 11m 22d Gender: Male Location: Macksville NSW. Posted 12/12/20 12:23 PM Author Share Posted 12/12/20 12:23 PM Hi k31th... I thought I'd get away with it but since the H brace has gone I've started cracking the dump pipe around the flange where it bolts to the turbo... I've migged it up with some bracing around the top flange but I reckon it'll break again with the amount of weight hanging off it...🤔 Link to comment Share on other sites More sharing options...
RegSpec Cruise Control 1,417 Member For: 17y 11m 22d Gender: Male Location: Macksville NSW. Posted 09/02/21 09:03 AM Author Share Posted 09/02/21 09:03 AM Is cracking around the top of the dump pipe a common thing?.... Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,043 Member For: 16y 8m 11d Gender: Male Location: Melbourne Posted 09/02/21 09:13 AM Share Posted 09/02/21 09:13 AM stock or aftermarket? I've seen the welds on aftermarket ones crack, but never seen a stock one do it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now