Jump to content

Where is the cat located on a 2014 FG MkII turbo?


keplaffintech

Recommended Posts

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Melbourne

either way, it should never be a $1k job, as at worst you cut the pipe, unbolt the ends, weld a flange on each end and bolt a cat in, which is the cost of the cat plus some flanges and a bit of labour which would never get anywhere close to $1k.

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Melbourne

just ask any exhaust shop to cut+shut it... won't be more than 2 hours of their labour even if things go horribly haha... plus you can ask what the labour rate is before committing to the work.

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Melbourne

That's clearly not bolt-in, since in the pic it has a v-band flange on it haha... those venom kits aren't realistically very cheap, but are "easy" for an exhaust place to fit up for you, in comparison to buying a ~$200-$300 100cpi catalytic converter and then paying them to weld it into place instead of your stock one. I did it in my BA (which has to be cut and welded since the cat doesn't come out easily, for $340 in Ballarat in 2017 (and that wasn't even a good price, I just rocked up and got it done, no shopping around)

Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 10m 25d
  • Gender: Male
  • Location: South Australia
  On 26/11/2020 at 7:30 AM, k31th said:

the pic it has a v-band flange on it

Expand  

 

Look again broski.

 

It doesn't matter if it's cheap or not, it's just another option for op to consider.

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Melbourne

well it definitely won't bolt up if it includes a flange-curved end of a pipe (without an actual flange)... you're saying that part of the piping is superfluous and you only get the hardware from the two actual flanges? if so, it's definitely not worth the money they're asking, since on the same website there's a cat for $180 from the same manufacturer.

Link to comment
Share on other sites

  • Puff
  • Gold Donating Members
  • Member For: 9y 10m 25d
  • Gender: Male
  • Location: South Australia
  On 26/11/2020 at 7:36 AM, Puffwagon said:

Look again broski.

Expand  

 

The flange bit you're talking about has slid down the pipe in the picture. Look again broski :happyfriends:

 

The title literally says "Venom Exhaust Stainless Ford FG XR6T Turbo F6 High Flow Bolt On Cat Pipe". The description says "It can be bolted up to a completely stock exhaust or with a cat-back system."

 

Anywho if we're debating whats worth the money then we should all sell our turbo taxis and all buy hondas xD

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Melbourne

haha :pooh: photography if they're trying to sell a product with a picture that depicts it in a "failed" position like the flange not being welded into place so it can be "bolted-on".

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'