coolxr6t New Member 8 Member For: 7y 11m 19d Posted 26/11/20 04:50 AM Share Posted 26/11/20 04:50 AM Hey guys, I have a turbo side intake installed on my fg. I like the intake noise, but not so much the loud turbo flutter from taking the bov off. Can anyone recommend a blow off valve I can install in place of where the old one was that isn't too loud. Or if I can somehow use the factory bov. I don't want it too loud if that's possible. Thanks Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 26/11/20 05:36 AM Share Posted 26/11/20 05:36 AM You can use the factory BOV, you'll just have to either have it vent to atmosphere (might not be legal and you should put a filter on it so it doesn't suck in outside air into the intercooled intake pathway) or plumb it over to the air intake to re-circulate like the factory setup does (it's a long and un-sightly fat hose to run over/around the engine to a turbo-side intake, unfortunately for this setup). Any 25mm BOV can work depending on whether you want it to vent or recirculate but the stock one is fine if you don't want to spend the money. 1 Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 261 Member For: 12y 1m 16d Gender: Male Location: Griffith NSW Posted 26/11/20 07:15 AM Share Posted 26/11/20 07:15 AM Here's how the BOV is installed with my turbo side kit. (green = hose, blue = BOV) I'm using a GFB Deceptor Pro adjustable BOV but the stock one will connect up just fine in the same spot 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 26/11/20 07:26 AM Share Posted 26/11/20 07:26 AM ^^ and that's about as good as you can get it from an "unsightly" point of view haha it's a big fat soft hose that just recirculates unused boost. 1 Link to comment Share on other sites More sharing options...
coolxr6t New Member 8 Member For: 7y 11m 19d Posted 26/11/20 09:43 AM Author Share Posted 26/11/20 09:43 AM How'd you connect it into intake? Drill a hole and weld a new connection? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 26/11/20 09:49 AM Share Posted 26/11/20 09:49 AM if it doesn't have a connection, yep, that's the way to go. 1 Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 261 Member For: 12y 1m 16d Gender: Male Location: Griffith NSW Posted 26/11/20 10:54 AM Share Posted 26/11/20 10:54 AM My kit came with a barb on it. If yours doesn't then yea, drill & weld. Link to comment Share on other sites More sharing options...
coolxr6t New Member 8 Member For: 7y 11m 19d Posted 26/11/20 08:57 PM Author Share Posted 26/11/20 08:57 PM Are there any bov's that you don't need to plumb back in that aren't too loud? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 26/11/20 09:14 PM Share Posted 26/11/20 09:14 PM Basically, no... they all make a "pssscht" sound when vented to atmo. Some change the sound (make it louder or high/low pitched etc) but they're all designed to be noisy if they change the sound, so the likely quietest is the stock BOV Link to comment Share on other sites More sharing options...
Rob70 Silver Donating Members 82 Member For: 4y 7m 12d Gender: Male Location: Wellington, NZ Posted 28/12/20 12:17 AM Share Posted 28/12/20 12:17 AM I'm running stock bov vented to atmosphere through a small k&n vent filter. It doesn't sound to obnoxious at all really. Definitely nothing like a ricey one. I'm running about 15psi and seems to work fine for now. Not sure if it's even legal here in NZ but I don't really give a crap. The alternative tu tu tu tu tu tu sound is not for me. Plumbing back to the inlet with turbo side intake is not the look I want either, to much hose! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now