Zlat347 Member 56 Member For: 6y 10m 19d Posted 14/08/20 03:14 AM Share Posted 14/08/20 03:14 AM hi all, I have been running a 3584RS for sometime now making about 500rwkw hub at about 22psi on stock motor. 6 boost and 50mm gate. wanted to see if any one is running one on built motor and maxing it out? curious to see what power they can be pushed to. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 9d Gender: Male Location: Adelaide Posted 14/08/20 04:17 AM Share Posted 14/08/20 04:17 AM What brand Hub Dyno ? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 4m 13d Gender: Male Location: Perth Posted 14/08/20 04:25 AM Share Posted 14/08/20 04:25 AM What does that matter. Link to comment Share on other sites More sharing options...
Zlat347 Member 56 Member For: 6y 10m 19d Posted 14/08/20 04:58 AM Author Share Posted 14/08/20 04:58 AM 41 minutes ago, JETURBO said: What brand Hub Dyno ? Mainline 3000hp Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 4m 13d Gender: Male Location: Perth Posted 14/08/20 08:19 AM Share Posted 14/08/20 08:19 AM I dont think a 3584 will make 3000hp Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 10m 11d Gender: Male Location: Western Sydney Posted 14/08/20 08:20 AM Share Posted 14/08/20 08:20 AM and the pelican strikes again. 1 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 9d Gender: Male Location: Adelaide Posted 14/08/20 09:35 AM Share Posted 14/08/20 09:35 AM (edited) 5 hours ago, arronm said: What does that matter. You really are a simple Khunt hey As Per your question @Zlat347 I tuned a Fully built Engine ( but capped at 30 psi build ) & 6R80 FG ute to 24.5 psi with a 6boost GTX3584rs 1.21 50mm Turbosmart Gate with plumb back to 517rwkw with “some” wheel spin on a new Mainline AWD Chassis Dyno comes on like nothing else but I place bets it could pip 530-540 on a ProHub no worries DynoPack Hub would read 650 lol and that’s no BS Edited 14/08/20 09:37 AM by JETURBO 1 Link to comment Share on other sites More sharing options...
sixman Donating Members 601 Member For: 20y 7m 18d Gender: Male Location: Hills District, NSW Posted 15/08/20 07:38 AM Share Posted 15/08/20 07:38 AM Wow! That setup builds boost so early. Must be an awesome streeter Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 9d Gender: Male Location: Adelaide Posted 15/08/20 08:13 AM Share Posted 15/08/20 08:13 AM It’s a very well set up vehicle and big credit goes to the owner who’s a very good mechanic and listens to recommendations so it’s payed off for him, it’s pretty nuts on the street though its a High stalled converter 6R80 so a few RWKW’s are lost in the driveline vs a ZF vehicle. If this was manual it would of been 550rwkw without a shadow of a doubt We procrastinated many times about where the 84rs would tap out and on paper it says 600+ But reality might only let that happen on a manual vehicle with 32-29 psi Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now