JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 4d Gender: Male Location: Adelaide Posted 16/10/21 12:07 PM Share Posted 16/10/21 12:07 PM 100% Guaranteed ! Cheetttt Nath, that’s pretty epic stuff man but I know what you’re up for as a few customers over the years have done the ol limmy bash and blown gear sets which in turn smashes everything and pumps metal fragments everywhere. Dats a engine out Jobby and a few parts to rectify indeed ! 1 Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 7m 15d Posted 16/10/21 12:26 PM Share Posted 16/10/21 12:26 PM Smashing billet gears? Surely not. Compared to the brittle cast gears there has to be something extremely wrong happened. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,180 Member For: 10y 1m 6d Gender: Male Location: South Australia Posted 16/10/21 07:58 PM Author Share Posted 16/10/21 07:58 PM Atomic chain, boundary gears, hpjunkie backing plate and adjustable relief. I rarely touched the limiter as I set it high enough to not touch it, I would always shift around 7k or so. It saw 7500 a handful of times. Not sure why it chose now to break but might have a better idea when it's apart. 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,180 Member For: 10y 1m 6d Gender: Male Location: South Australia Posted 17/10/21 01:27 AM Author Share Posted 17/10/21 01:27 AM 14 hours ago, violetpop said: Ouch.. what's the chance of valve to piston contact Intake cam is locked up so yerp...she farked! Exhaust side spins still. 1 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 10m 13d Gender: Male Location: Canberra ACT Posted 17/10/21 02:18 AM Share Posted 17/10/21 02:18 AM That sucks mate 1 Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 12y 10d Gender: Male Location: Frankston, 3199 Posted 17/10/21 02:23 AM Share Posted 17/10/21 02:23 AM Ouch 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,180 Member For: 10y 1m 6d Gender: Male Location: South Australia Posted 17/10/21 02:30 AM Author Share Posted 17/10/21 02:30 AM 13 hours ago, gaz097 said: Smashing billet gears? Surely not. Compared to the brittle cast gears there has to be something extremely wrong happened. Dunno yet bu thinking the pump body exploded, sent sh*t into the crank gear/timing chain, stretched/snapped the chain/pulled the lower pin out of the adjustable chain guide and that was it. Eh it's all good. I've got what I need to fix it, so the cost to sort it out should be reasonable. I'm sure I can justify an upgrade or two while it's apart lol. Only a few bolts away from having the engine out so yerp...just stuff and work 1 Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 10m 6d Gender: Male Location: Brisbane Posted 17/10/21 08:07 AM Share Posted 17/10/21 08:07 AM Well a bit worse than thought, at least you can do it yourself. Where does that cam make power too? Might want to go just a hint smaller. Get a custom from crow see what they think should go in there. Just ideas... Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,180 Member For: 10y 1m 6d Gender: Male Location: South Australia Posted 17/10/21 09:13 AM Author Share Posted 17/10/21 09:13 AM I've had it making peak power on the dyno at 6800rpm but it will make power to about 7500 from my further testing. This means the power will keep climbing until then. If you read a few posts back in the thread you'll see that I've recently played with it and set it to 00 aka 5900 again. Still revs to 7500 no worries though. Not interested in spending money on cams as the only way down for me is stock. Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 678 Member For: 5y 8m 5d Posted 17/10/21 09:28 AM Share Posted 17/10/21 09:28 AM I wonder if you broke the crank, which in turn shattered your oil pump Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now