Puffwagon Puff Gold Donating Members 15,824 Member For: 9y 9m 6d Gender: Male Location: South Australia Posted 08/05/21 08:06 AM Author Share Posted 08/05/21 08:06 AM (edited) Cheers, I did assemble the motor in my lounge room, but after I made about 420awkw the rest was done on the dyno. I reckon anyone could achieve what I've done with about 30k, if they did the work and tuning themselves. I did an oil and filter change too this morning before I tuned it, as it was definitely due! But yerp 953awhp ain't 1000awhp so gonna have to see what the turbo has left in it... Edited 08/05/21 08:08 AM by Puffwagon 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 5d Gender: Male Location: Adelaide Posted 08/05/21 08:07 AM Share Posted 08/05/21 08:07 AM That’s a doosie mate Whats your thoughts on what you seen while tuning and upon reflection on that graph ? was this in full AWD mode on the Dyno ? Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,824 Member For: 9y 9m 6d Gender: Male Location: South Australia Posted 08/05/21 08:20 AM Author Share Posted 08/05/21 08:20 AM The dyno is in 4x4 traction stability mode. I ramped it at 170. I could have ramped it in a lot slower I reckon. I was a bit worried about the trans but even on the road it is ok. It reaches 24ish psi by 3950 on the road and is about 1000rpm later on the dyno. Iats were a lot higher on the dyno than the road which doesn't help much. Also cheap silicone couplers swell up like balloons with 30+psi in them What are your thoughts on the recent progression/graph etc? @JETURBO Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 5d Gender: Male Location: Adelaide Posted 08/05/21 09:11 AM Share Posted 08/05/21 09:11 AM The progression is good Nathan, it’s always a shame that one gain costs a low loss but that’s the world we live in. It does seem that there’s a flow restriction maybe hence nearly 90 odd Kw drops off in the top end but could be a variety of things at play The aeroflow looks to be going well which is good 1 Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 6m 4d Gender: Male Location: Brisbane Posted 08/05/21 09:13 AM Share Posted 08/05/21 09:13 AM (edited) Flow restriction would be the head Edited 08/05/21 09:14 AM by adams355 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,824 Member For: 9y 9m 6d Gender: Male Location: South Australia Posted 08/05/21 09:33 AM Author Share Posted 08/05/21 09:33 AM I had a look through the logs just now and it reaches peak power at 5900rpm then falls over from there. I reckon the cam timing is affecting it a fair bit. From what I've found out recently, a zero zero cam gear setting is miles off what it should be. This will be fixed next weekend and retuned after. I still have the stock lower half of the intake manifold in there and I also have a venom 5 inch cat as well. Both of these could be holding it back a bit and all of this can be tested. I can make up a decat pipe fairly easily to see how much difference it makes. Fwiw these cams are designed for 1200 to 1800hp and I'm still a good 100 crank hp away from that. 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,824 Member For: 9y 9m 6d Gender: Male Location: South Australia Posted 08/05/21 09:46 AM Author Share Posted 08/05/21 09:46 AM I'll have to look through the dyno graphs again. I went up incrementally in boost so I have 5 or 6 different power level graphs to compare. I think it started dropping the top end at 550awkw or so. Link to comment Share on other sites More sharing options...
violetpop Silver Donating Members 436 Member For: 4y 10m 28d Posted 09/05/21 09:31 AM Share Posted 09/05/21 09:31 AM Treat yourself to a slurpee from 7-11 mate 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,824 Member For: 9y 9m 6d Gender: Male Location: South Australia Posted 09/05/21 09:48 AM Author Share Posted 09/05/21 09:48 AM I live half an hour from anywhere so a beer will suffice 1 Link to comment Share on other sites More sharing options...
bjc Donating Members 2,823 Member For: 21y 2m 1d Gender: Male Location: Townsville Posted 09/05/21 10:49 AM Share Posted 09/05/21 10:49 AM That's an excuse to do another quick YouTube video of it roasting the tyres when launching now...Pick up some milk and bread for the kids! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now