Puffwagon Puff Gold Donating Members 16,019 Member For: 9y 11m 4d Gender: Male Location: South Australia Posted 01/08/20 05:48 AM Author Share Posted 01/08/20 05:48 AM Cheers, yes that's on E85. Those results are from my road tuning. I had it on the dyno today for checking and a real dyno number, rather than using virtual dyno. I know that there can be improvements here and there but I'll be back to the dyno to fine tune it some more, where I can safely and accurately measure changes. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 3d Gender: Male Location: Adelaide Posted 01/08/20 07:04 AM Share Posted 01/08/20 07:04 AM Hey good results mate especially for AWD Get a layout with fuel on it ? The 11.8 psi actuator can hold more just wind up the preload and be willing to accept more on the initial hit 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,093 Member For: 16y 8m 24d Gender: Male Location: Melbourne Posted 01/08/20 07:12 AM Share Posted 01/08/20 07:12 AM 7 minutes ago, JETURBO said: The 11.8 psi actuator can hold more just wind up the preload and be willing to accept more on the initial hit sounds like a recipe for broken driveline components and/or wheelspin Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,019 Member For: 9y 11m 4d Gender: Male Location: South Australia Posted 01/08/20 07:22 AM Author Share Posted 01/08/20 07:22 AM You're right about the wheel spin. 10 minutes ago, JETURBO said: Hey good results mate especially for AWD Get a layout with fuel on it ? The 11.8 psi actuator can hold more just wind up the preload and be willing to accept more on the initial hit Thanks mate, haha I was thinking of ya today. I even stalked some of your previous dyno sheets to see what I should be aiming for. I didn't get the fuel on the dyno sheet but we did log it on the dyno so can overlay it in the future. I did log every run on the laptop, so I do have all the fuel data. We saw a 0.5 afr difference between my wb that is installed at the front of the cat and the dyno wb at the tailpipe. We ended up a bit fat according to my wb. Mid 11 up to high 11 overall. I've got the actuator set to "just a touch tighter than barely holding it shut" and don't get boost spikes for the most part. Good to know there's some left in it when I free up the exhaust. If you want a look I'll pm you a run or two. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,019 Member For: 9y 11m 4d Gender: Male Location: South Australia Posted 04/08/20 02:19 AM Author Share Posted 04/08/20 02:19 AM Here's a second gear launch with a teeny bit of foot brake to get it moving of the line quicker. It goes pretty good really but I think it could do with a bit moar POWAHHH 3 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,093 Member For: 16y 8m 24d Gender: Male Location: Melbourne Posted 04/08/20 02:22 AM Share Posted 04/08/20 02:22 AM much better 1 Link to comment Share on other sites More sharing options...
Romulus Donating Members 1,279 Member For: 19y 11m 30d Location: Perth Posted 04/08/20 02:44 AM Share Posted 04/08/20 02:44 AM Start saving them pennies, it's ZF/6R80 time soon! I just had mine done, the gearshifts are crisp and sharp compared to the factory box. No amount of tuning will overcome the factory hardware deficiencies. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,019 Member For: 9y 11m 4d Gender: Male Location: South Australia Posted 04/08/20 02:53 AM Author Share Posted 04/08/20 02:53 AM I've got a 6r80 box here that I can use parts from. I've also got a set of exedy clutches for the zf, so depending how the clutches are in the E drum from the 6r80, I'll reuse them or get new ones. Depending on what gets replaced, the box will be relatively inexpensive if I do it all myself. A new torque converter will be the biggest cost I reckon. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 16,019 Member For: 9y 11m 4d Gender: Male Location: South Australia Posted 04/08/20 05:43 AM Author Share Posted 04/08/20 05:43 AM Woot trans service done. All the fun. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,093 Member For: 16y 8m 24d Gender: Male Location: Melbourne Posted 04/08/20 06:24 AM Share Posted 04/08/20 06:24 AM nice... how's it drive/shift now after that? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now