Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 22d Gender: Male Location: South Australia Posted 16/06/20 05:19 AM Author Share Posted 16/06/20 05:19 AM Standard size pistons slipped into a torque plate honed bore. Luckily the bores were perfectly round etc in this block. Top ring 22 thou, second ring 28 thou in case you wanted to know. Oh that reminds me, I've gotta sort out a catch can asap. 58 minutes ago, JETURBO said: Dudeeeeeeee cummmoooonnnnnn , Show us the Dyno sheet lol, Can’t say all that then not show us hahah I didn't get one cos ain't no point having a sheet that shows how much the car sucks! However to not totally blue ball everyone the dyno showed 290kw at about 4000rpm. The virtual dyno sheet shows 395kw at 4300 then drops out the arse coming back up to just over 300kw. The numbers make it seem slower than it is but then again a dyno number, real or virtual, is just a number It does go from 0 to 100 in about 4.6 seconds though so you can kinda guess the power from that. This is from a few days ago on the highway. 2 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 20d Gender: Male Location: Adelaide Posted 16/06/20 05:31 AM Share Posted 16/06/20 05:31 AM Its not about how much it sucked but a great way to share and look at what it did, why it did it and what options you have to rectify... it’s a good thing you’ve made the effort to get it on a Dyno... I’ve said it once and I’ll say it again the street is about good for 1/2 a tune tops. The Dyno is a bloody expensive tuning tool and should be used accordingly !! would love to see what it did and where it did it as I’ve got a TT coming in soon for mods and not much to compare it too when it does what tune shop did you go to, what Dyno ? 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 22d Gender: Male Location: South Australia Posted 16/06/20 05:44 AM Author Share Posted 16/06/20 05:44 AM I can get the dyno sheet, they still have my file on record, but I want to fix at least the ignition side of things then go back down and recheck it, this time with a back pressure sensor in the nbo2 location. I think I'll head down again on Saturday, providing the parts arrive before then. I can send you my tune and logs if you're keen for a peek. I went to Towler Mechanical, I think they have a DD dyno there but I don't really know much about dynos. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 20d Gender: Male Location: Adelaide Posted 16/06/20 07:18 AM Share Posted 16/06/20 07:18 AM (edited) I’m surprised you didn’t want it for reference, you paid for it obviously as ol Bill does zero for love haha Definitely don’t let Towler touch it though lol Yeh he has an older DD AWD It’s my golden rule on any B series, no new coil packs and plugs, no Dyno been there stuffed around with that way too many times ! Always here if you want me to have a gander mate Without even looking at it 21 psi on 98 with 300 @ 4000rpm seems a big chunk too much boost, use the Dyno to dial in efficiency throughout the tune, this is the point of a calibrated tuning tool. No guessing required Edited 16/06/20 07:21 AM by JETURBO 1 Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,432 Member For: 14y 11m 26d Gender: Male Location: Melbourne Posted 16/06/20 08:00 AM Share Posted 16/06/20 08:00 AM how far are you from azza puff ? Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 22d Gender: Male Location: South Australia Posted 16/06/20 08:02 AM Author Share Posted 16/06/20 08:02 AM I figured that since I could see it falling over on the dyno, I'd see what I can fix and then head back to compare. I just wanted to see what it made today so no tuning was done. I will be sure to get a copy when it's working properly! The plugs are very new ngk coppers and down to 0.55 but I used old coils. They didn't have much use on them but they have been sitting for a few years. I know that I'm asking a lot from a slightly modified exhaust system and if the new coils and plugs don't pick it up to where it should be then the back pressure test should tell the tale. I'll be sure to organise a longer session and drop the exhaust next time if needed. Just now, Admin (as if) said: how far are you from azza puff ? Just up the road pretty much, maybe a 45 minute drive. 1 Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,432 Member For: 14y 11m 26d Gender: Male Location: Melbourne Posted 16/06/20 08:29 AM Share Posted 16/06/20 08:29 AM oh asif you didnt use any excuse to visit fluff azza 2 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 20d Gender: Male Location: Adelaide Posted 16/06/20 08:33 AM Share Posted 16/06/20 08:33 AM (edited) Nah we’re in the CBD basically now, Living around the corner from the two new Houses we are having built that we’ve got going on so the day’s of hill sprints through Greenwith are gone lol Get the most out of it Puffy, go some bit and pieces, take some tools and make ol Bill work for ya Get that love bus movin ! Edited 16/06/20 08:34 AM by JETURBO 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 22d Gender: Male Location: South Australia Posted 16/06/20 08:46 AM Author Share Posted 16/06/20 08:46 AM Yeah mate that's the plan! I'm gonna be riding on a crazy bus 1 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 7m 29d Gender: Male Location: Canberra ACT Posted 16/06/20 08:55 AM Share Posted 16/06/20 08:55 AM Haha love you can hear the keys jangling around after you get off the throttle 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now