Regany New Member 22 Member For: 5y 6m 9d Posted 04/06/20 06:58 PM Share Posted 04/06/20 06:58 PM Has anyone had issues with fualt codes coming up saying software Incompatible with ecm/pcm and lost comunitcation with ecm/pcm only happens under full load and full boost then a warming light comes on and says comms error the boost gauge on the dash goes all the way up even at no revs, has only started doing it after the tune and the tuner has looked over the settings he put in and said they were normal and is not sure why it's doing it. The car is a 2009 fg f6. Any information would be much appreciated Thanks. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,030 Member For: 16y 8m 1d Gender: Male Location: Melbourne Posted 05/06/20 01:44 AM Share Posted 05/06/20 01:44 AM did the issue start happening as it was tuned? or did it start happening at some other known point? Link to comment Share on other sites More sharing options...
Regany New Member 22 Member For: 5y 6m 9d Posted 05/06/20 01:51 AM Author Share Posted 05/06/20 01:51 AM Never happend untill after the tune it would not fault on the dyno and it did about 20 runs, happens in 3rd gear having the foot hard down. I do have a faulty steering alignment sensor but that's a separate system Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,030 Member For: 16y 8m 1d Gender: Male Location: Melbourne Posted 05/06/20 01:55 AM Share Posted 05/06/20 01:55 AM right... so you tuned it, it ran fine until you hit full boost in 3rd gear and those same 3rd/4th gear pulls on the dyno didn't cause any issues? this post has a similar issue to yours... have you changed the PCM? https://www.fordxr6turbo.com/forum/topic/94279-xr6-07-ecu-fault-pcm/ Link to comment Share on other sites More sharing options...
Regany New Member 22 Member For: 5y 6m 9d Posted 05/06/20 02:02 AM Author Share Posted 05/06/20 02:02 AM No I haven't changed the pcm And no I wouldnt fualt on the dyno at all, the car dosnt go into limp mode a warning light comes up and then I exit out of it and after about 10secs it goes back to normal Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,030 Member For: 16y 8m 1d Gender: Male Location: Melbourne Posted 05/06/20 02:07 AM Share Posted 05/06/20 02:07 AM hmm sounds like an electrical issue, then... with regard to how to diagnose it, I've got no idea haha Link to comment Share on other sites More sharing options...
Regany New Member 22 Member For: 5y 6m 9d Posted 05/06/20 02:13 AM Author Share Posted 05/06/20 02:13 AM Yeah me neither unfortunately 😂 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 10d Gender: Male Location: Western Sydney Posted 05/06/20 04:08 AM Share Posted 05/06/20 04:08 AM Do you have a throttle controller in?Mine caused an issue like that. It needed to be recalibrated, came good after that. Link to comment Share on other sites More sharing options...
Regany New Member 22 Member For: 5y 6m 9d Posted 05/06/20 08:34 AM Author Share Posted 05/06/20 08:34 AM Nah I dont have one mate Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now