XR6 vehicle speed sensor wiring help

[VodkaMan]

Hey guys looking for some advice.

 

I converted my BA to a 6 speed manual and am about to wire up a reverse lockout solenoid Control box that actives under 8 kmh. The control box requires input from the vehicle speed sensor VSS. Some cars have this on the gearbox. But with the falcon the speed reads off the wheel bearings and into the abs?

Can I tap into the two wire speed sensor from the back of the wheel for my VSS? Will abs affect any of this? Cheers

http://www.grcperformance.com/Instructions/Reverse Lockout.pdf

Attached is the instructions. Last page has the wiring diagram

[k31th]

you can wire the reverse lockout by earthing the solenoid on the gearbox then connecting into the positive on the brake pedal switch for when the pedal is depressed, so the lockout is engaged unless you have the foot on the brake.