MerkPerk New Member 5 Member For: 4y 10m 10d Posted 03/04/20 07:38 AM Share Posted 03/04/20 07:38 AM Hey everyone, long time lurker here just after some advice. I've recently done the bolt-on and tune thing with my MKii FG and starting to research into getting my orange taxi into the 380-400 rwkw mark. After going down the Garrett Gen II 3576/3582 rabbit hole, I've stumbled on some new turbo offerings from Aeroflow and their Boosted range that looks like it was released in 2019. They have a bolt-on BA/BF/FG turbos which are GTX3576/3582 equivalents and known as the Aeroflow Boosted 5862 (GTX3576) and the Boosted 6662 (GTX3582) that both come with exhaust housings and a 36mm flapper. I've done my best to find some/any information on them and its sparse out there. I've found a Skyline and 2JZ Soarer with a 6662 bolted to them and that's about it other than PR posts from Aeroflow on FB etc. Has anyone heard of these? Anyone using one? As much as I want to spend $3k on a Gen II Garrett id prefer spend $2k on one of these and spend the extra on fuel system and supporting mods if these turbos check out. Have provided some links here: Boosted 5862 & Boosted 6662. Link to comment Share on other sites More sharing options...
Slowxr6t Member 567 Member For: 6y 2m 9d Location: New zealand Posted 03/04/20 08:01 AM Share Posted 03/04/20 08:01 AM A ball bearing garrett gt3582r with a .70 compressor housing got me 382 rwkw at 15psi and 414rwkw at 18psi with supporting mods. Hardly any more lag over stock turbo. I didnt want to push it further because I dont want to smash my zf6spd or driveshaft or engine for that matter, and it is plenty fast enough with 382rwkw on the road. You dont need a big dollar turbo for this level. Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 9m 12d Gender: Male Location: Western Sydney Posted 03/04/20 08:27 AM Share Posted 03/04/20 08:27 AM Well if their fittings are anything to go by I would not touch them.Speedflow for fittingsGarret for turbos. 1 Link to comment Share on other sites More sharing options...
finnas Gold Donating Members 105 Member For: 15y 1m 1d Posted 03/04/20 08:35 AM Share Posted 03/04/20 08:35 AM https://www.ebay.com.au/itm/Garrett-GTX3576r/174103292833?hash=item28895d6ba1:g:S2EAAOSwa7RchynZ Cant believe this guys turbo still up on here. I bought his other one that is a GEN2 76. Highly recommend. 1 Link to comment Share on other sites More sharing options...
bfuteboy35 New Member 3 Member For: 4y 10m Posted 02/06/20 10:52 PM Share Posted 02/06/20 10:52 PM I'm Interested. Did anyone try out these turbos? Particularly the 6662 Link to comment Share on other sites More sharing options...
finnas Gold Donating Members 105 Member For: 15y 1m 1d Posted 03/06/20 01:12 AM Share Posted 03/06/20 01:12 AM Checkout maxperformance's instagram. They use them quite often. Link to comment Share on other sites More sharing options...
MerkPerk New Member 5 Member For: 4y 10m 10d Posted 03/06/20 04:24 AM Author Share Posted 03/06/20 04:24 AM Still waiting for some sort of tangible results. I tried looking for maxperformances IG but came up short. Do you know the exact spelling finnas? Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 9m 22d Gender: Male Location: Canberra ACT Posted 03/06/20 06:36 AM Share Posted 03/06/20 06:36 AM Double Xhttps://www.instagram.com/maxxperformance_official/?hl=en Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,229 Member For: 16y 10m 3d Gender: Male Location: Melbourne Posted 03/06/20 07:26 AM Share Posted 03/06/20 07:26 AM just one (obvious) aero-turbski in the first few hundred photos haha. not the best advocacy. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 13d Gender: Male Location: Adelaide Posted 03/06/20 09:02 AM Share Posted 03/06/20 09:02 AM Aeroflow FB page which is an open page has results and seeing 500rwkw on 22 psi with a BF turbo and all the usual mods Pretty much bang on with GTX G2 82 Rear housing looks like a bit average quality but only time and kms will tell so far not bad for cheap coin, just bought a GTX G2 today and currently horrendous costs due to the US dollar / Covid -19 around 20% gain over February price point so making the Aeroflow more appealing, if anyone’s interested I can get better than RRP on the full Aeroflow range, just buzz me a PM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now