k31th less WHY; more WOT Site Developer 29,051 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 20/12/20 12:15 AM Share Posted 20/12/20 12:15 AM yeah, things like cached data or browser up-to-date setup or antivirus etc might be of concern Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 20/12/20 02:34 AM Author Share Posted 20/12/20 02:34 AM Mods list: Built BA engine GTX3582gen2 39mm iwg, B series manifolds, 4" dump 5" cat twin 2.5" exhaust. PW stage 2 cooler Plazmaman turbo side intake and cold side piping. PW surge tank, 1000cc id injectors GFB fuel reg. Ford coils and gas .7 plugs. Built trans not slipping or getting hot. That's the basics Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 20/12/20 03:15 AM Author Share Posted 20/12/20 03:15 AM Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 7m 21d Gender: Male Location: Brisbane Posted 20/12/20 06:07 AM Share Posted 20/12/20 06:07 AM (edited) Do you know what the compression ratio of the built motor ended up at? What size is the piping from the turbo to intercooler? Edited 20/12/20 06:10 AM by adams355 Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 20/12/20 07:59 AM Author Share Posted 20/12/20 07:59 AM I'll find out comp from builder, piping from turbo to I/c is 2.5". Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,752 Member For: 13y 5m 1d Posted 20/12/20 09:34 AM Share Posted 20/12/20 09:34 AM Hotside won't affect it too much. Be interested if you have boost control issues. There is a bit of a torque bump at low rpm. Guessing 19psi is zero duty cycle Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 20/12/20 12:24 PM Author Share Posted 20/12/20 12:24 PM Forgive my short responses I can still only post a few words at a time - so weird. Boost control is through an Eboost street as I'm using the RTV pcm. He did mention something about a characteristic of the convertor at low rpm but no dramas with boost control. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,051 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 20/12/20 12:36 PM Share Posted 20/12/20 12:36 PM try something like typing up your post in a text editor first, then copy+paste it directly into the "reply" box for the forum? Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 20/12/20 12:52 PM Author Share Posted 20/12/20 12:52 PM I'll give it a go Keith, thanks Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 21/12/20 12:32 AM Author Share Posted 21/12/20 12:32 AM Specs of pistons, we did use a slightly thicker head gasket than the 20 thou specc'd on the sheet so compression just under 9:1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now