3Katz Donating Members 122 Member For: 6y 10m 17d Posted 28/03/20 01:08 AM Share Posted 28/03/20 01:08 AM The current setup in my RTV is a stock BA Turbo with FG cams and Atomic springs. I am using a Typhoon cooler, the turbo is a Hypergear ATR45 and we're at 260kw through a BTR. It is a good combo and fun to drive but I would like to do more racing at Willowbank. I am in the process of having a forged bottom end built with ARP gear to hold it all together, I have a PW stage 2 kit ordered along with the hot side piping. I would like to use the factory intake and exhaust manifolds and keep it internal gate with a 4" dump. It would be great if the current turbo were up to the task of maximising the new setup but I'm not sure it will be. I realise I may have to get my auto built, if I do it won't be with a high stall convertor as this is still my daily driver. What would you guys recommend? I have done lots of reading and am leaning towards a GTX3582 but have no experience in selecting a turbo... I should have mentioned I will have a good fuel system but can only run 98, e85 is not an option where I live. Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 5m 21d Posted 02/04/20 06:30 AM Share Posted 02/04/20 06:30 AM I want to see what a G35-900 does. If it does what it claims I.e. 900hp flow with a 62mm inducer that has better response than a standard GT3582, then it'd be spot on Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,048 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 02/04/20 08:00 AM Share Posted 02/04/20 08:00 AM good luck with better response and also 900hp haha Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 02/04/20 09:24 AM Author Share Posted 02/04/20 09:24 AM Unless this project takes a different turn I think the GTX3582 will be fine for my purposes, just spreading out my cost timeline at the moment. Strange times we're living in... 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,048 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 02/04/20 09:27 AM Share Posted 02/04/20 09:27 AM it's fine for almost anybody's purposes on a turbo B or F-series. Link to comment Share on other sites More sharing options...
3Katz Donating Members 122 Member For: 6y 10m 17d Posted 02/04/20 09:34 AM Author Share Posted 02/04/20 09:34 AM Yes seems like a good thing, looking forward to surprising more Commodores in the old farm ute once it's finished and the tracks are open again 1 Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 4m 5d Gender: Male Posted 02/04/20 12:25 PM Share Posted 02/04/20 12:25 PM 5 hours ago, Tom Tucker said: I want to see what a G35-900 does. If it does what it claims I.e. 900hp flow with a 62mm inducer that has better response than a standard GT3582, then it'd be spot on I'm also curious. Autotech recently tuned a Subaru that made 450rwks with a GTX3584RS, customer wasn't happy with the slow spool (Circuit car), so they tried a G35 (900 I think) It made just under the 446rwkws but came on a hell of a lot earlier. Customer was very happy. I'd love to see a G35-900 on a falcon 2 Link to comment Share on other sites More sharing options...
TUF6 New Member 21 Member For: 4y 7m 23d Posted 28/05/20 01:12 PM Share Posted 28/05/20 01:12 PM I’m going ahead with the g35-900 engine builder and tuner said it’ll be great for my power level. I’m looking forward to trying the g series turbo was originally going to put a gen 2 gtx3582r but have heard really good things about the g series turbos. 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,048 Member For: 16y 8m 12d Gender: Male Location: Melbourne Posted 28/05/20 01:13 PM Share Posted 28/05/20 01:13 PM are you going to use the stock exhaust housing? it'll spool the same as a stock GT3582R, roughly, then. Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 4m 5d Gender: Male Posted 28/05/20 01:53 PM Share Posted 28/05/20 01:53 PM I don't think it fits, completely different turbo. Will probably need a custom exhaust manifold aswell 1 hour ago, TUF6 said: I’m going ahead with the g35-900 engine builder and tuner said it’ll be great for my power level. I’m looking forward to trying the g series turbo was originally going to put a gen 2 gtx3582r but have heard really good things about the g series turbos. How much power are you chasing? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now