_XR6T New Member 5 Member For: 5y 4m 7d Posted 08/02/20 01:53 AM Share Posted 08/02/20 01:53 AM (edited) Hi guys, In the below image, does the end of the 3.5" centre pipe fit directly to the OE system on a FG XR6T sedan? Or is another part required? Edited 08/02/20 01:54 AM by _XR6T Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/ Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,493 Member For: 17y 1m 2d Gender: Male Location: Melbourne Posted 08/02/20 02:05 AM Share Posted 08/02/20 02:05 AM the stock exhaust is twin 2.25" so it definitely won't bolt up to a single 3.5" outlet... you'll need a Y-piece and somebody to sort out the connection from the 2.25" to the single 3.5". Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1692174 Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 10y 20d Gender: Male Location: Canberra ACT Posted 08/02/20 05:07 AM Share Posted 08/02/20 05:07 AM The FG exhaust is only twin for a small run within a single section, and so all of the flanges are single (not with the car at the moment to confirm).So I would think what is in that pic is fine, unless I'm misunderstanding something? Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1692175 Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 11m 11d Gender: Male Location: Adelaide Posted 08/02/20 07:48 AM Share Posted 08/02/20 07:48 AM Xforce have options to suit a variety of layouts and grades full off the shelf custom exhausts full custom to OE OE replacement mild high grade mild 409 raw SS part polished SS full polished this is in nearly every combination you can think of so it’s critical to know exactly what you need before ordering. You can get the part you see that bolts up to OE cat back location Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1692176 Share on other sites More sharing options...
Daiman Pansino New Member 10 Member For: 3y 9m 17d Posted 25/07/21 01:11 PM Share Posted 25/07/21 01:11 PM Just bought an xforce catback and upon installation noticed that on my 2009 mk1 fg there’s no flange past the cat so I’m unable to connect it unless maybe I get it cut and welded or would it better open to go for a hi flowing cat, which would seem like less of a hassle to do as I’m kinda unsure and also what would be more cost effective Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1706282 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,493 Member For: 17y 1m 2d Gender: Male Location: Melbourne Posted 25/07/21 01:36 PM Share Posted 25/07/21 01:36 PM just get it cut and welded Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1706284 Share on other sites More sharing options...
Daiman Pansino New Member 10 Member For: 3y 9m 17d Posted 25/07/21 10:09 PM Share Posted 25/07/21 10:09 PM Yeh I <3 Bananas cheers man Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1706285 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,493 Member For: 17y 1m 2d Gender: Male Location: Melbourne Posted 25/07/21 10:33 PM Share Posted 25/07/21 10:33 PM it's not an expensive or difficult job to get a couple of flanges put in Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1706286 Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 11m 11d Gender: Male Location: Adelaide Posted 26/07/21 04:34 AM Share Posted 26/07/21 04:34 AM You’ve ordered the wrong one, as per my previous post explains 1 Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1706290 Share on other sites More sharing options...
Daiman Pansino New Member 10 Member For: 3y 9m 17d Posted 26/07/21 04:37 AM Share Posted 26/07/21 04:37 AM Could u send a photo or link for the right one? Link to comment https://www.fordxr6turbo.com/forum/topic/95495-xforce-connecting-pipe-to-oe-system/#findComment-1706291 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now