Jump to content

Recommended Posts

  • Member
  • Member For: 8y 23d
  • Gender: Male
  • Location: Brisbane

What spring have you got in actuator 15-16? This happened to mine once it was the dodgy solenoid which weirdly was working fine, then I had my turbo rebuilt and I put it back on and then it was dead. But I thought yours was tuned to 13-14 or something. Strange.

  • Silver Donating Members
  • Member For: 5y 5m 16d

Yeah for sure.. I played around with this turbo smart actuator when I had it off and couldn't get it to go any lower. I'll probably go back to my stock actuator mate or maybe an fg one.

  • Silver Donating Members
  • Member For: 5y 5m 16d
  On 06/04/2021 at 12:06 PM, adams355 said:
What spring have you got in actuator 15-16? This happened to mine once it was the dodgy solenoid which weirdly was working fine, then I had my turbo rebuilt and I put it back on and then it was dead. But I thought yours was tuned to 13-14 or something. Strange.
I haven't opened it up to confirm the spring but it was supplied as the 12psi version. At the last tune it was tuned at around 15.5 pounds and stayed solid at that boost level until just now since I did the head gasket. I changed the solenoid about a year ago so it hasn't done much work.
  • Member
  • Member For: 8y 23d
  • Gender: Male
  • Location: Brisbane

Yea my solenoid was only 12 months old as well. Put it on the dyno was over boosting badly. The turbo smart actuator is better but a pain to set up :popcorn2:

  • Like 1
  • Silver Donating Members
  • Member For: 5y 5m 16d

Not much in terms of the boost issue. Driven the car a few times though and all running smooth on spring pressure. Boost and temp in check. The atomic bleeder valve rolled up today so I aim to check things out over the weekend. 939482d46e47205f488dc3fccf7ba09d.jpg

  • Silver Donating Members
  • Member For: 5y 5m 16d

Swapped out the solenoids and still over boosting. Looks like some dyno time is needed and check over the tune.

Last night was cool and intake temps were low, even when I by passed the solenoid again it was making 1 or 2 more psi than the other night. Have you guys noticed changes in boost between summer and winter temps?7fcb2ee69a576bf47c8d8ab86399d301.jpg

  • Bronze Donating Members
  • Member For: 13y 10m 4d

Any boost control in open loop will see big difference in boost levels due to ambient temperature. I can see up to 3psi change going from 10 to 40 degrees ambient.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'