Tom Tucker Donating Members 669 Member For: 5y 4m 16d Posted 08/05/21 03:28 AM Author Share Posted 08/05/21 03:28 AM Nah, just a standard head reco at this stage Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 4m 16d Posted 11/05/21 09:57 PM Author Share Posted 11/05/21 09:57 PM Dyno-Mite cams inbound! 1 Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 4m 16d Posted 08/07/21 08:53 AM Author Share Posted 08/07/21 08:53 AM Update: engine build complete. Went JE pistons with upgraded wrist pins. Howards billet rods. Should be good for 1200hp. 3 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,858 Member For: 9y 9m 17d Gender: Male Location: South Australia Posted 08/07/21 09:18 AM Share Posted 08/07/21 09:18 AM Farken send it! Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 4m 16d Posted 08/07/21 10:54 AM Author Share Posted 08/07/21 10:54 AM I'll send it as far as a G35-900 can go, don't you worry! 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,858 Member For: 9y 9m 17d Gender: Male Location: South Australia Posted 08/07/21 11:25 AM Share Posted 08/07/21 11:25 AM Sounds good mate. Looking forward to seeing the results 1 Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 4m 16d Posted 08/07/21 11:37 AM Author Share Posted 08/07/21 11:37 AM Will take a little while. I think the shop won't install the engine for another month. Getting the engine bay painted and tidied up. Then they want to do a 1000km run in before sending. Which works well, because I need to bed that clutch in... 1 Link to comment Share on other sites More sharing options...
gaz097 Bronze Donating Members 1,751 Member For: 13y 3m 25d Posted 09/07/21 02:13 AM Share Posted 09/07/21 02:13 AM This thing will be a beast. Good work 1 Link to comment Share on other sites More sharing options...
eff xr6t Member 569 Member For: 11y 1m 16d Posted 10/07/21 04:21 AM Share Posted 10/07/21 04:21 AM What made you go with the howards rods? Ive got a set in my built sohc bit worried about breaking them when I turn it up past 1100hp after a mate has broken one. You got any plans for a bigger then the g35-900 in future? Link to comment Share on other sites More sharing options...
Tom Tucker Donating Members 669 Member For: 5y 4m 16d Posted 10/07/21 09:05 AM Author Share Posted 10/07/21 09:05 AM My engine builder is a fan of US made stuff, and Howards seem to have a rep for being well finished billet steel rods. Was originally going to get Carillo rods, but there was a 4 month wait on those. Looked at Nitto, but the Howards are significantly cheaper. The G35-900 will only make 600rwkw absolute max, so I'll be well within safety margins. Not interested in massive turbos Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now