Killerxr6turbo Member 50 Member For: 6y 2m 15d Gender: Male Location: Melbourne Posted 26/05/19 10:21 AM Share Posted 26/05/19 10:21 AM Hey everyone, my downpipe is knocking on steering it isnt instant only after going above 3000 revs what would be causing it. It only happened after I took it to a local mechanic just to do front wheel bearing. Well he thrashed the vehicle so bad a mate actually witnessed my car drifting up a local street while I was at work. Exhaust and downpipe was installed at nizpro Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 3d Gender: Male Location: Perth Posted 26/05/19 10:51 AM Share Posted 26/05/19 10:51 AM (edited) Take it to Nizpro to check the dump. How did your mate rate the drift, 1 - 10 with 10 being fully sick. Any photos or video. This is me at 9 /10 Edited 26/05/19 10:53 AM by arronm Link to comment Share on other sites More sharing options...
spook Donating Members 180 Member For: 16y 7m 26d Gender: Male Posted 26/05/19 10:58 AM Share Posted 26/05/19 10:58 AM Check drivers side engine mount Mine was stuffed and had the same issue. Replaced then all good Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 3d Gender: Male Location: Perth Posted 26/05/19 11:02 AM Share Posted 26/05/19 11:02 AM (edited) Yep could be. Check for rusty stain at the engine mount. Limit drifting until you fix it.. Or keep drifts at 1 / 10 Edited 26/05/19 11:03 AM by arronm Link to comment Share on other sites More sharing options...
Killerxr6turbo Member 50 Member For: 6y 2m 15d Gender: Male Location: Melbourne Posted 26/05/19 11:15 AM Author Share Posted 26/05/19 11:15 AM yep I thought engine mount I checked all bolts on exhaust manifold and all tight nothing loose going to nizpro on tuesday. no no vids mate wasnt quick enough yep he said car was flying sideways I actually no the mechanic that was driving he is one big hoon. drifts will come soon going back to nizpro shortly for valve springs n e85 conversion Link to comment Share on other sites More sharing options...
BeerTurbo Donating Members 241 Member For: 6y 6m 21d Posted 27/05/19 01:37 AM Share Posted 27/05/19 01:37 AM did you jack the bottom of the engine to see if the engine mount has separated? it will be hard to spot visually, unless you point a cammera at it and go reproduce the issue. hopefully your mechanic at least top'd up your fuel tank for joyriding in your car, id be more concern'd regarding him getting your car impounded though. Link to comment Share on other sites More sharing options...
spook Donating Members 180 Member For: 16y 7m 26d Gender: Male Posted 27/05/19 04:51 AM Share Posted 27/05/19 04:51 AM Pop bonnet, jump back in drivers seat, fire it up and watch engine Then load up the drive line - any engine movement? Link to comment Share on other sites More sharing options...
Killerxr6turbo Member 50 Member For: 6y 2m 15d Gender: Male Location: Melbourne Posted 09/06/19 12:04 PM Author Share Posted 09/06/19 12:04 PM hey all it was the engine mount downpipe all good now. but still got some knocking from exhaust feel like its coming from the cat area, the cat on it is nizpro high flow or could be coming from the start of the exhaust from the cat the exhaust is xforce its very loud when it knocks it does come and go but annoying non the less Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,001 Member For: 16y 7m 20d Gender: Male Location: Melbourne Posted 09/06/19 12:20 PM Share Posted 09/06/19 12:20 PM the xforce tend to hit the rear suspension. 1 Link to comment Share on other sites More sharing options...
NA_TURBO Member 532 Member For: 9y 1m 22d Gender: Male Location: Mildura Posted 09/06/19 12:46 PM Share Posted 09/06/19 12:46 PM YepProbably hitting the diff cradle or around that area.Mine does Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now