Jump to content

Recommended Posts

  • Donating Members
  • Member For: 6y 9m 8d
  • Gender: Male
  • Location: SA

Has any one here fitted one of theses fuel assemblies. ( I don't care what to) I was going to fit the Walbro GS341 kit ( 255ltr/hr )  But if this is any good I would pay the extra.

Comes with the Walbro pump and they claim fixes surging. https://www.ebay.com.au/itm/WALBRO-GSS341-255LPH-FUEL-PUMP-ASSEMBLY-FORD-FALCON-FG-FGX-XR6-TURBO-XR8-FPV-F6/292224073229

  • less WHY; more WOT
  • Site Developer
  • Member For: 17y 17d
  • Gender: Male
  • Location: Melbourne

I got one for my BA XR6T (2004) and it had to be modified by the tuner to work at all for his requirements to tune the car. Unfortunately, the modification itself I have no details of as it appears to be a trade secret. An in-tank module can never guarantee to fix all "surge" issues, but can definitely help if the swirl pot itself is larger. Realistically, a surge tank is a better solution, but costs more for the higher capability to resolve surge and provide higher pumping abilities.

  • Dropping a turd
  • Gold Donating Members
  • Member For: 17y 6m
  • Gender: Male
  • Location: Perth
  On 16/05/2019 at 12:56 PM, HOTXR6T said:

Has any one here fitted one of theses fuel assemblies. ( I don't care what to) I was going to fit the Walbro GS341 kit ( 255ltr/hr )  But if this is any good I would pay the extra.

Comes with the Walbro pump and they claim fixes surging. https://www.ebay.com.au/itm/WALBRO-GSS341-255LPH-FUEL-PUMP-ASSEMBLY-FORD-FALCON-FG-FGX-XR6-TURBO-XR8-FPV-F6/292224073229

Expand  

 

My 460 in a pod from that seller was a straight drop in with all the internals modified. My tuner stripped the pump and module and check before it was installed. 

 

What fuel and power are you going for?

  • Like 1
  • Donating Members
  • Member For: 6y 9m 8d
  • Gender: Male
  • Location: SA

I only want to use 98 and sometimes BP Ultimate. 320 rwkw is about all I want. I know a surge tank is a better option for people looking for more rwkw. I just didn't  want to buy this if its no better than just the walbro pump, which is half the price.

  • New Member
  • Member For: 11y 9m 16d

Just upgrade the intank pump. I ran a proflow 340 lph pump intank and made 320 rwkw with no issues at all. Just don't get too low on fuel. You should be fine if you don't drive like a madman.

  • Donating Members
  • Member For: 6y 9m 8d
  • Gender: Male
  • Location: SA

I was just reading a thread on one of the better fb groups about someone wanting to fit a bigger pump, there are some comments that you need the car tuned because of higher fuel rail pressure, what do the experts here think ?

  • Member
  • Member For: 9y 6m 19d
  • Gender: Male
  • Location: Mildura

You would possibly need an aftermarket fuel pressure reg because the stock one doesn't always cope with the extra pressure. I'm not sure about a "tune" but as long as you're not raising the boost pressure I can't see how it would hurt.

But if you get it tuned with a higher base fuel pressure, please don't think you can drop your fuel pressure back to stock base and think the car will be fine. We've already had someone do that..

  • Like 1
  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 7m 4d
  • Gender: Male
  • Location: Perth

You need to drill out the small return hole in the return venturi that pops into the bottom of the mra to prevent excess fuel pressure. 

 

Any of the half decent pre assembled 460lt/hr mra's should have the bigger hole already. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'