Rowdy1 New Member 2 Member For: 5y 7m 19d Posted 12/05/19 03:07 PM Share Posted 12/05/19 03:07 PM Hi everyone, need some help with my partners FG Turbo. He has changed the engine and the boys have it all back together but we are all scratching our heads wondering why the car won't turn over and start. They have checked wiring, battery connection, fuel lines, u name it they have probably checked it. They have hooked up a scan tool and it is spitting out faults unsure what faults though as I didnt see the results. Does anyone have any clues?? Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 12y 3d Gender: Not Telling Posted 12/05/19 11:34 PM Share Posted 12/05/19 11:34 PM hey we would need to see the fault codes to have a better idea. if everythings connected then could be an electrical plug not seated fully or something little like this. Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 13y 1m 1d Gender: Male Location: WA, Perth Posted 13/05/19 12:15 AM Share Posted 13/05/19 12:15 AM Did you guys install the ECU that came with the new engine, or did you use the old one that was in the car? Link to comment Share on other sites More sharing options...
4321 Bronze Donating Members 257 Member For: 10y 9m 5d Posted 13/05/19 08:27 AM Share Posted 13/05/19 08:27 AM make sure they used the engine loom of the old mtr . It shouldn't throw codes if everything is plugged in (like the 3 plugs under the ecu, very easy to latch 1 up without it being seated first) Link to comment Share on other sites More sharing options...
Rowdy1 New Member 2 Member For: 5y 7m 19d Posted 30/05/19 02:56 PM Author Share Posted 30/05/19 02:56 PM They managed to get the car started My partner pulled out all the wires and reconnected them again....however needs new gearbox as old 1 I <3 Bananased out so it doesn't sound the best atm. Thanks for your responses. Link to comment Share on other sites More sharing options...
Dolos New Member 2 Member For: 5y 7m 12d Posted 30/05/19 10:10 PM Share Posted 30/05/19 10:10 PM Iv got a 03 xr6 turbo with 4speed auto we have just replaced the intake plenum gasket as it blows one every month or so. I went to start it an it cranks over like it wants to start but then sends a single backfire out the exhaust. Iv tested for spark an it only sparks after I stop cranking it over its got us really lost any help would be awesome cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now