karlp2 Member 81 Member For: 11y 4m 8d Gender: Male Location: Auckland, New Zealand Posted 16/04/19 02:02 AM Share Posted 16/04/19 02:02 AM Hi, have G6ET with 355rwkw, currently have a full xforce system with the twin 2.5” pipes. Other mods include a Walbro 400, PW stage 1 intercooler, 1000cc injectors, GTX3582 gen 2 with flapper mod and porting etc. Had hoped for more kw from the recent tune, a couple people have suggested that single exhaust 4” system would help, thoughts? Reluctant to change the exhaust unless it’ll make a difference, wasn’t cheap to buy being a full stainless one. Thanks Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 8y 4m 10d Posted 16/04/19 02:17 AM Share Posted 16/04/19 02:17 AM (edited) instead of me writing a big spill, click here instead. There is some good information and will get you in the right direction. You also have to take other things into account, that affect power, like temps on the day, dyno etc. There are gains to be had by going to a 4" of course and many equations to play with to calculate, as well as pros/cons of going bigger like, it will be louder, likely hang lower etc etc Edited 16/04/19 02:26 AM by MBAF Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,984 Member For: 9y 10m 25d Gender: Male Location: South Australia Posted 16/04/19 02:40 AM Share Posted 16/04/19 02:40 AM That link reckons a twin 2.5 system only supports 463hp at the crank. On this forum we've seen a twin 2.5 system support more than 670hp at the wheels. Op, post your dyno sheet so we've got more of an idea what's going on. Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 8y 4m 10d Posted 16/04/19 02:54 AM Share Posted 16/04/19 02:54 AM yeah that's not taking into account variables or forced induction. VE on a 2.5" twin setup has flow similar to a single 3.5" (again depending on the setup in question) for all we know currently this could be a sub frame back 2.5" and not full system, plenty of variables here Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,984 Member For: 9y 10m 25d Gender: Male Location: South Australia Posted 16/04/19 02:59 AM Share Posted 16/04/19 02:59 AM 3 minutes ago, MBAF said: for all we know currently this could be a sub frame back 2.5" and not full system 54 minutes ago, karlp2 said: currently have a full xforce system with the twin 2.5” pipes Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 8y 4m 10d Posted 16/04/19 03:01 AM Share Posted 16/04/19 03:01 AM but "full" doesn't necessarily mean full Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,984 Member For: 9y 10m 25d Gender: Male Location: South Australia Posted 16/04/19 03:04 AM Share Posted 16/04/19 03:04 AM Lol perhaps not. I'm sure we'll get to the bottom of it. Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 13d Gender: Male Location: SW Sydney Posted 16/04/19 03:16 AM Share Posted 16/04/19 03:16 AM (edited) 403rwkw 98 / 438rwkw e85 with twin 2.5" xforce here, same injectors, pump and intercooler. Fuel setup (no surge) and gt3540 were the next limitation not exhaust Unless a sedan version doesn't flow as well as a ute but doubt it @karlp2 was there some query about your tuner....jet had a few comments iirc lol 4" dump and cat to clarify Edited 16/04/19 03:19 AM by camo86T 1 Link to comment Share on other sites More sharing options...
karlp2 Member 81 Member For: 11y 4m 8d Gender: Male Location: Auckland, New Zealand Posted 16/04/19 03:30 AM Author Share Posted 16/04/19 03:30 AM Appreciate your feedback. Yes I’m looking at other tuner options, nothing really jumping out at me with the rep of tuners here Link to comment Share on other sites More sharing options...
karlp2 Member 81 Member For: 11y 4m 8d Gender: Male Location: Auckland, New Zealand Posted 16/04/19 05:35 AM Author Share Posted 16/04/19 05:35 AM 2 hours ago, MBAF said: but "full" doesn't necessarily mean full By full exhaust I’m talking about from, and including the dump pipe back Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now