Tryptykon New Member 2 Member For: 5y 8m 19d Posted 10/04/19 10:28 AM Share Posted 10/04/19 10:28 AM Hey lads, I've got a 2010 FG XR50 turbo ute, and I've been looking into lowering it front and rear to make it sit better. I want to hear other people's experience and what they've used, not TOO fussed on brand, but I want to get the rear leaf springs reset right so the front and rear sit level. There's a heap of options, and couldn't find TOO much info so I thought I'd make my own topic. (Also was wondering what problems anyone has encountered, if any at all, and if it upset the diff/tailshaft/pinion angle?) Cheers Link to comment Share on other sites More sharing options...
scotto14 Member 2 Member For: 11y 9m 9d Posted 10/04/19 10:46 AM Share Posted 10/04/19 10:46 AM P Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 28d Gender: Male Location: Western Sydney Posted 10/04/19 11:51 AM Share Posted 10/04/19 11:51 AM Keep the rear a touch higher than the front it you can. Leaves it able to ute still and allows a touch more clearance for a 4" exhaust. Best bet is shockworx front coil overs and their rear damper with a set of lowered rear leafs. To compliment that for some handling I'd fit a superpro rear sway bar. If it tramps fit some caltracs or mal wood tramp rods (mals kit won't allow the sway bar to fit). Or be a fool and put a 4 link in the back. Some fool here did that, turns out the above would be better and more affordable by a long shot. Too add to that. Piss off the rear saddle bushes. Either replace them with steel replicas of the Bush or remove them completely. They go soft in a week and make the rear end seem loose. Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 8y 4m 15d Posted 10/04/19 11:54 AM Share Posted 10/04/19 11:54 AM 3 minutes ago, OZYWALKER said: Or be a fool and put a 4 link in the back. Some fool here did that 😂 Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,433 Member For: 15y 4d Gender: Male Location: Melbourne Posted 10/04/19 11:55 AM Share Posted 10/04/19 11:55 AM @JETURBO whats that combo you used on that last ute you did that was perfect. Link to comment Share on other sites More sharing options...
xr6666turbo Donating Members 102 Member For: 7y 6m 21d Gender: Male Location: Brisbane Posted 10/04/19 06:53 PM Share Posted 10/04/19 06:53 PM I agree with Ozywalker. I have the Shockworks gear and some lowered Pedders leaf springs on my BF. Good setup. Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 8y 4m 15d Posted 10/04/19 11:13 PM Share Posted 10/04/19 11:13 PM @camo86T What’s your fg setup on the ute Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 17d Gender: Male Location: SW Sydney Posted 11/04/19 04:27 AM Share Posted 11/04/19 04:27 AM New or old? Link to comment Share on other sites More sharing options...
MBAF Bronze Donating Members 2,156 Member For: 8y 4m 15d Posted 11/04/19 04:38 AM Share Posted 11/04/19 04:38 AM either, didn't you say you had a decent setup on the old one, but not crazy? Link to comment Share on other sites More sharing options...
camo86T Silver Donating Members 1,810 Member For: 10y 10m 17d Gender: Male Location: SW Sydney Posted 11/04/19 04:51 AM Share Posted 11/04/19 04:51 AM Old one has kings sl coils front, rears are kings sl leaves with an anti tramp half leaf on top which seems to work well Koni red shocks all round Super pro bushes which are good except for the leaf saddle bushes which as dan said go soft and you have to keep tightening the arse end... would be pissing them off and knocking up some steel/ally replacements if I wasn't selling it, may still do it yet. 'New' one also has sl coils up front, but standard leaves with 50mm lowering blocks and still has the standard shocks all round. It looks great and is definitely more comfy...handles just like you'd expect a bag of sh*t on a water bed would lol Sorting that out is on the cards at some point but not for a while yet. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now