Mushable New Member 8 Member For: 6y 11d Gender: Male Location: Darwin Posted 04/03/19 04:59 PM Share Posted 04/03/19 04:59 PM 2011 FG XR6 TURBO - 110xxxkms The question is can I get 400rwkw out of these mods. - High-Flowed gt3576 with the billet 11 blade core. and ported front and rear housing with Flapper mod. & 12psi actuator - Process west stage 2 intercooler and piping - Turbo side intake - Bosh 1000cc Injectors and walbro 460 intake pump. - X-Force 4inch Dump and Cat & Middle Muffler delete - Atomic Valve Springs & Retainers. The motor has been in awesome condition never missed a service. very (Healthy motor) Question is can I get 400rwkw living in Darwin with approximate these temps in the tuning shed. 40°C 80% humidity Any other mod I can add to rectify I can get 400rwkw? Link to comment Share on other sites More sharing options...
Mushable New Member 8 Member For: 6y 11d Gender: Male Location: Darwin Posted 04/03/19 05:16 PM Author Share Posted 04/03/19 05:16 PM Wanting to stay on 98ron Link to comment Share on other sites More sharing options...
4321 Bronze Donating Members 257 Member For: 10y 8m 2d Posted 04/03/19 06:43 PM Share Posted 04/03/19 06:43 PM you need a bigger turbo, gtx 3582 or similar. The '76 will not flow enough air for that 1 Link to comment Share on other sites More sharing options...
tds New Member 17 Member For: 7y 11m 4d Posted 06/03/19 10:14 AM Share Posted 06/03/19 10:14 AM Get a Pro64 Turbo it’ll hit 400 on 98 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 1d Gender: Male Location: Perth Posted 06/03/19 10:19 AM Share Posted 06/03/19 10:19 AM On 05/03/2019 at 12:59 AM, Mushable said: 2011 FG XR6 TURBO - 110xxxkms The question is can I get 400rwkw out of these mods. - High-Flowed gt3576 with the billet 11 blade core. and ported front and rear housing with Flapper mod. & 12psi actuator - Process west stage 2 intercooler and piping - Turbo side intake - Bosh 1000cc Injectors and walbro 460 intake pump. - X-Force 4inch Dump and Cat & Middle Muffler delete - Atomic Valve Springs & Retainers. The motor has been in awesome condition never missed a service. very (Healthy motor) Question is can I get 400rwkw living in Darwin with approximate these temps in the tuning shed. 40°C 80% humidity Any other mod I can add to rectify I can get 400rwkw? May go 300 on a cool day.. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,425 Member For: 14y 11m 3d Gender: Male Location: Melbourne Posted 06/03/19 10:20 AM Share Posted 06/03/19 10:20 AM gtx3576 faster spool good for street car, I wish I went that way back in the day. a gtx 3582 will go to 500 but, you can take a better advantage of it on a built motor to ramp up the boost. heheh Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 28d Gender: Male Location: Adelaide Posted 06/03/19 08:37 PM Share Posted 06/03/19 08:37 PM Derp a “Modded” 76 has enough to go 400 on 98 but not with a stock front cover, you’ll need the 0.6 GTX cover and then you may as well just go a full turbocharger replacement imho but I've personally tuned a GT3576 with the wheel upgrade and porting to 366rwkw on 98 and definitely had more in it at that point, how much more on the stock 0.5 cover I would say about 10-15rwkw more maxxx, seen the 0.6 front cover (so basically a full GTX 3576 ) do 405rwkw on 98 and 441rwkw on E85 the reason you won’t be up close to the 400 mark will purely be because of the N.T’s weather 40* and 80% does nothing for nobody including turbocharged vehicles lol Technically the hardware choice is close at 380 ish rwkw on a strong boost tune but not at those conditions 1 Link to comment Share on other sites More sharing options...
Damo... victor New Member 12 Member For: 6y 1m 24d Posted 01/10/19 05:16 PM Share Posted 01/10/19 05:16 PM 308rwkw stock gt3576. For me with pretty much same set up .ive got a new set up coming get me up there bit more .Ai performance mate he does the i6's well and many other brands all cope in the heat 🤙 but love dry season lol Link to comment Share on other sites More sharing options...
sixman Donating Members 600 Member For: 20y 4m 6d Gender: Male Location: Hills District, NSW Posted 02/10/19 03:53 AM Share Posted 02/10/19 03:53 AM 320rwkw stock gt3576, 390rwkw gtx3576, 450rwkw pte6235, 450rwkw efr9174 (quickest spool) on pump98. Water/meth injection for consistent power regardless of ambient temp. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now