BF MK2 XR6 Turbo Airbags

[ibby-kunis]

Hi guys, so I’ve had a light accident in my xr6 turbo, basically the only damaged was a cracked front bar so I got a new one and changed it, and my airbags went off in the accident.

The panel beater put a new front tie bar that sits behind the front bar, and I put new airbags in the driver steering wheel and passenger side, and I left the fuse out incase it goes off again.

So my airbag light was on when the fuse was in (before I took it out), what else needs to be changed so I can get rid of the airbag light?

[EGO747]

Possibly:

Check if the pretensioners have been fired, the RCM (under dash - must be correct type (A,B,C), crash sensor near the bonnet catch may also need to be changed.

[ImTheCobra]

  On 04/03/2019 at 9:21 AM, ibby-kunis said:

Hi guys, so I’ve had a light accident in my xr6 turbo, basically the only damaged was a cracked front bar so I got a new one and changed it, and my airbags went off in the accident.

The panel beater put a new front tie bar that sits behind the front bar, and I put new airbags in the driver steering wheel and passenger side, and I left the fuse out incase it goes off again.

So my airbag light was on when the fuse was in (before I took it out), what else needs to be changed so I can get rid of the airbag light?

Expand  

Airbag module brother!