Help boost cut

[Natho724]

Haha funny youd say the it didnt look pretty identical exept for tips and only hade one muffler 

[El Andrew]

  On 24/02/2019 at 12:25 PM, Natho724 said:

Awsome thankyou ill give that a go tommorow the only thing after market I can notice is a fpv cooler and he said it was all stock it hade a 2half inch cat back but I put the stock back on 

The factory XR6 cooler on a B series has an FPV label, so still may be stock unless it is actually an F6 cooler.

[ilk]

I was told mine was stock. But it was tuned.

 

Just take it to a tuner with a dyno. 

[El Andrew]

Same here. Twice!

Don't even need a dyno run to confirm - if they can hook up to your ECU they can tell very easily.

I checked mine with PCMTec by comparing the file with a stock file and discovering there were differences.

[Natho724]

Got the dump off and checked flapper it opens fully and seems to be in good order 

[k31th]

with compressed air?

[Natho724]

Yea with compressed air in the hose that comes off the actuator

[k31th]

and it opens fully on what PSI from the compressor?

[Natho724]

I set the regulator to about 6 psi and it was opening fully bye the time I squeezed the gun all the way in so I'd say 6 psi give or take 1or 2 psi 

[k31th]

then it's very likely your car actually has a tune in it.