Natho724 New Member 18 Member For: 6y 1m 18d Posted February 24, 2019 Author Share Posted February 24, 2019 Haha funny youd say the it didnt look pretty identical exept for tips and only hade one muffler Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676405 Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 11m 19d Gender: Male Location: Canberra ACT Posted February 24, 2019 Share Posted February 24, 2019 On 24/02/2019 at 12:25 PM, Natho724 said: Awsome thankyou ill give that a go tommorow the only thing after market I can notice is a fpv cooler and he said it was all stock it hade a 2half inch cat back but I put the stock back on The factory XR6 cooler on a B series has an FPV label, so still may be stock unless it is actually an F6 cooler. Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676419 Share on other sites More sharing options...
ilk Is on holiday from communism Member 1,282 Member For: 6y 3m 8d Gender: Female Location: Victoria Posted February 24, 2019 Share Posted February 24, 2019 I was told mine was stock. But it was tuned. Just take it to a tuner with a dyno. Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676420 Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 11m 19d Gender: Male Location: Canberra ACT Posted February 24, 2019 Share Posted February 24, 2019 Same here. Twice!Don't even need a dyno run to confirm - if they can hook up to your ECU they can tell very easily.I checked mine with PCMTec by comparing the file with a stock file and discovering there were differences. Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676421 Share on other sites More sharing options...
Natho724 New Member 18 Member For: 6y 1m 18d Posted February 25, 2019 Author Share Posted February 25, 2019 Got the dump off and checked flapper it opens fully and seems to be in good order Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676433 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,397 Member For: 17y 1d Gender: Male Location: Melbourne Posted February 25, 2019 Share Posted February 25, 2019 with compressed air? Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676434 Share on other sites More sharing options...
Natho724 New Member 18 Member For: 6y 1m 18d Posted February 25, 2019 Author Share Posted February 25, 2019 Yea with compressed air in the hose that comes off the actuator Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676436 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,397 Member For: 17y 1d Gender: Male Location: Melbourne Posted February 25, 2019 Share Posted February 25, 2019 and it opens fully on what PSI from the compressor? Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676439 Share on other sites More sharing options...
Natho724 New Member 18 Member For: 6y 1m 18d Posted February 25, 2019 Author Share Posted February 25, 2019 I set the regulator to about 6 psi and it was opening fully bye the time I squeezed the gun all the way in so I'd say 6 psi give or take 1or 2 psi Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676452 Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,397 Member For: 17y 1d Gender: Male Location: Melbourne Posted February 25, 2019 Share Posted February 25, 2019 then it's very likely your car actually has a tune in it. Link to comment https://www.fordxr6turbo.com/forum/topic/94613-help-boost-cut/page/2/#findComment-1676454 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now