Is a 0.82 rear housing too small

[danger]

Hi Lads, I would like too know if anyone has had any experience with a Precision 6466 with a 0.82 rear housing on their barra. If so I would like to know if you think that rear is too small to make decent power? Also anyone who has tried it what were your power figures and what was the response like....Cheers Lads.

[Puffwagon]

I asked this question about 18 months ago about a gt(x)35 in that size housing with a 50mm ex gate. I got a reply from one of our resident tuners and apparently it's not that great.

 

Ya'd think it'd come on early though, but you might want a couple of gates on the manifold to make big power.

 

As alway, this is just my opinion/guesstimate, and for all we know I don't know my arse from a hole in the ground.

[k31th]

are you ok, Nath? lol

 

it'll be reasonable, but will probably be too small for that specific turbo as most people want 500rwkw, and it'll run out of puff at the top end for that sort of power.

[Puffwagon]

Haha all good, I haven't used that disclaimer for a while so I figured it's time to pull it out and dust it off.