BarraRx7 Member 46 Member For: 6y 1d Posted 17/12/18 03:34 PM Share Posted 17/12/18 03:34 PM Hello everyone, I see there’s a few Americans doing Barra swaps, so I guess I’m here for info, help, and just general discussion. I have an FC rx7 that I was doing a 4g63 in from my old mirage / evo 1 that went 8.9@155 in the quarter. Since working on the new chassis I came across a Barra and have decided to take the 4g out and drop the ford in. I’m looking for 1500 hp at some point. I plan to start with the Borg 80 mm turbo I currently have . The rx7 has a power glide and ford 9” in it as well as a 25.5 cage. I also already have the glide to Barra adapter. I’m looking at spool imports destroker kit and would like any input on their products. The other things I’m looking for are cams, vernier gears, valves, gasket kits, timing chain and other odds and ends I don’t have access too. Thanks in advance for the help! Link to comment Share on other sites More sharing options...
BarraRx7 Member 46 Member For: 6y 1d Posted 17/12/18 03:40 PM Author Share Posted 17/12/18 03:40 PM 3 Link to comment Share on other sites More sharing options...
ilk Is on holiday from communism Member 1,282 Member For: 5y 11m 15d Gender: Female Location: Victoria Posted 07/01/19 01:48 AM Share Posted 07/01/19 01:48 AM Surprised you haven't twisted the chassis in half on the rx7 Link to comment Share on other sites More sharing options...
BarraRx7 Member 46 Member For: 6y 1d Posted 07/01/19 09:38 PM Author Share Posted 07/01/19 09:38 PM I don’t think she will twist 3 Link to comment Share on other sites More sharing options...
CCCC miso xr6 Donating Members 317 Member For: 16y 8d Posted 07/01/19 11:51 PM Share Posted 07/01/19 11:51 PM Very nice fc mate, if you going to want information and great parts, the best person for you to speak to is brad from attomic performance parts. His landline phone no. is 02 8665 5889 this is the best person to speak to for all your barra engine information, you could also visit his youtube channel were he has techtips and products on show. 1500hp wont be a problem with this engine as we have quite a few making that in australia, we even have dion from dynomite performance making over 2000hp. Link to comment Share on other sites More sharing options...
BarraRx7 Member 46 Member For: 6y 1d Posted 08/01/19 12:52 AM Author Share Posted 08/01/19 12:52 AM I’ve been talking to phantom performance and it seems I should be on the right track Link to comment Share on other sites More sharing options...
BarraRx7 Member 46 Member For: 6y 1d Posted 20/01/19 09:36 PM Author Share Posted 20/01/19 09:36 PM Well she’s apart . I need someone to point me in the right direction for cams . Looking to stay with a 4.0 and keep the rpm around 8-8.5k Thanks 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,040 Member For: 16y 8m 7d Gender: Male Location: Melbourne Posted 20/01/19 10:05 PM Share Posted 20/01/19 10:05 PM 8.5k is massive RPM on these motors... it's going to have to be super strong to handle that... Link to comment Share on other sites More sharing options...
BarraRx7 Member 46 Member For: 6y 1d Posted 20/01/19 10:08 PM Author Share Posted 20/01/19 10:08 PM Hmm I’m doing full fill on the block, ibeam rods, and bullet pistons with upgraded pins. Maybe I won’t take it quite that far 1 Link to comment Share on other sites More sharing options...
BarraRx7 Member 46 Member For: 6y 1d Posted 20/01/19 10:45 PM Author Share Posted 20/01/19 10:45 PM What are most people revving the 4.0 out to making 1,100 + hp Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now