No fuel pump/won’t crank

[Bailey98]

Alright I may be missing something simple or just entirely I <3 Bananased up, hoping someone has the answers

 

swapping the engine from my ba Xr6t into my bf, started off with the steering column, bem, and ecu just to make sure icc would work and would crank. Changed them all over connected startermotor and earthed it out had a mate crank it(dumbly enough got covered in fuel) but it definitely cranked.

 

used the loom from the bf on the ba engine, connected it all up too the motor before dropping it in. Dropped the engine in connected the startermotor up, tried to crank it. Will not crank and the fuel pump will not work either but the icc still turns on.

 

Any help would be appreciated thank you

[3Katz]

Check connections from the engine wiring harness to pcm. If it's an auto did you connect up the transmission plug? It's at the back near the engine harness plug.