arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 21d Gender: Male Location: Perth Posted 26/05/18 07:33 AM Share Posted 26/05/18 07:33 AM No the spacer has to be set up for the new box There is a specific procedure for installing the flywheel bolts with loctite Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 26/05/18 07:52 AM Author Share Posted 26/05/18 07:52 AM Ok, haven't come across that yet. Will look further into when I get closer to putting back it back in. Cheers Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 21d Gender: Male Location: Perth Posted 26/05/18 08:45 AM Share Posted 26/05/18 08:45 AM You did kinda leave yourself open to the comments 1809's using my standard retainers. The tuner said to go for that. It was an interesting conversation though. Like he didn't want to give out the info and started off by saying just use whatever. So having second thoughts on using him now.He is a good guy and knows his sh*t. It would be annoying if a customer insisted on doing all the work themselves then asked for info on how to do it/what to use etc. You gotta be realistic Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 26/05/18 01:31 PM Author Share Posted 26/05/18 01:31 PM Yes he is a nice guy and I realise he knows his sh*t. That's was I was taken back by said phone call.Only reason I rang to ask which springs is because when I picked up the car from them he was all positive about me doing it all. He said give him a call if I had any questions. What was I supposed to do? Link to comment Share on other sites More sharing options...
shaness8 Member 89 Member For: 15y 4m 14d Gender: Male Posted 08/06/18 11:26 AM Share Posted 08/06/18 11:26 AM How did you go with the Valve tool The crow 1809 with stock retainer is it the same seat pressure as Vtkba6t-24 kit. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 16d Gender: Male Location: Adelaide Posted 08/06/18 12:13 PM Share Posted 08/06/18 12:13 PM On 26/05/2018 at 11:01 PM, Renton said: Yes he is a nice guy and I realise he knows his sh*t. That's was I was taken back by said phone call. Only reason I rang to ask which springs is because when I picked up the car from them he was all positive about me doing it all. He said give him a call if I had any questions. What was I supposed to do? Its a tuff one mate, you want to help everyone yet you end up with a bunch of people who waste your time and have to accept that’s part of the gig at the same time try to help the genuine ones what would you do in the reverse application ??? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 21d Gender: Male Location: Perth Posted 08/06/18 01:41 PM Share Posted 08/06/18 01:41 PM 2 hours ago, shaness8 said: How did you go with the Valve tool The crow 1809 with stock retainer is it the same seat pressure as Vtkba6t-24 kit. No the crow retainers are thicker so more seat pressure. Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 09/06/18 12:48 PM Author Share Posted 09/06/18 12:48 PM Haven't progressed much more with the tool yet, or anything else. Once I get the motor out I'll be finishing it. Having other issues at the moment. As for the seat pressure, I got different Info from the tuna. But if you go by the Crow info, the kit has more seat pressure. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 21d Gender: Male Location: Perth Posted 09/06/18 02:03 PM Share Posted 09/06/18 02:03 PM On 6/8/2018 at 9:41 PM, arronm said: No the crow retainers are thicker so more seat pressure. This info might not be correct, conflicting info even on the crow website. Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 01/07/18 01:54 PM Author Share Posted 01/07/18 01:54 PM (edited) Finally got my shed to a point where I could get the old girl back in today so spent the arvo removing the engine. Bit of work ahead but will keep chipping away at it. Next step is start pulling everything off the engine and cleaning and prepping everything to be re-sealed, will change valve springs before re assembling, and tidy up the mess of an engine bay. It's really stuffing with my ocd at the moment. Edited 01/07/18 01:55 PM by Renton 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now