Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 06/05/18 10:34 AM Author Share Posted 06/05/18 10:34 AM Beauty. That's a fair bit cheaper than the iridiums I priced up. Cheers Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 24d Gender: Male Location: Probably above atmospheric pressure Posted 06/05/18 02:59 PM Share Posted 06/05/18 02:59 PM Work for over 50,000km as well, ask me how I know! 1 Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 07/05/18 12:20 PM Author Share Posted 07/05/18 12:20 PM How do you know? Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 08/05/18 11:48 AM Author Share Posted 08/05/18 11:48 AM Looking for Crow valve springs at the moment. After a google search it looks like ebay is cheapest so far with $418 delivered. Is there anywhere else I should be looking? I decided to make my own valve spring removal/installation tool, so last Friday I started making some parts at work. I also have some mild steel plate to use for the base. I just need to cut to size. Cut some pieces of 20mm sched 80 pipe and some SS round bar. I'll tig weld the caps onto the pipe, then put in the lathe and put a small center drill in the cap for the bolts to locate. Doing it this way as that's the material we had and was much easier than machining them out of 2" stainless round bar. Have some m12 x 110 a4-70 bolts I will grind a point on the end to locate in caps. Just did a rough outline of where I'll cut the window to access the top of valve stem. I was thinking of doing the one on the left, but wasn't sure if there'd be any strength issues or slipping off the spring retainer. So I'll probably just do it like the one on the right. Must be a reason the other manufactures do it like that. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 21d Gender: Male Location: Perth Posted 08/05/18 12:19 PM Share Posted 08/05/18 12:19 PM (edited) How much boost are you going to be running Crow have 3 part numbers Edited 08/05/18 12:21 PM by arronm Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 08/05/18 01:03 PM Author Share Posted 08/05/18 01:03 PM (edited) All of it! Didn't actually talk about a boost level with Rob. The Crow springs on ebay #1809 are 95lbs. I'm guessing those or the 90's would be the go. I haven't checked with him yet. Edited 08/05/18 01:08 PM by Renton Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 21d Gender: Male Location: Perth Posted 08/05/18 02:00 PM Share Posted 08/05/18 02:00 PM 1808 = 90lbs 1809 = 105lbs VTKBA6T-24 = 1809 with retainers. you know you can hire the tools for $85. Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 08/05/18 09:52 PM Author Share Posted 08/05/18 09:52 PM (edited) That same kit number is on eBay from different sellers and list different 2 different pressures and specs. So I was going off the Crow website for the pressures. They list 1808= 90 and 1809= 95. Yes looked into hire the tool. Would be around 100 by the time I post it back. Or I can make it for free at work, and I get to keep it ? Edited 08/05/18 09:54 PM by Renton Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 21d Gender: Male Location: Perth Posted 09/05/18 03:03 AM Share Posted 09/05/18 03:03 AM You tuner will tell you which springs. Dont go heavy if your running say 15psi. http://www.crowcams.com.au/Portals/0/Catalogue/Index PDF 2018 Cat/Ford 6 DOHC BA-FG.pdf?ver=2017-10-19-132458-293 Link to comment Share on other sites More sharing options...
Renton Member 151 Member For: 6y 8m 12d Gender: Male Location: Perth Posted 09/05/18 11:23 AM Author Share Posted 09/05/18 11:23 AM Yep will be checking with him which springs to go for. I was guessing tune would be around the 12-15psi mark. Do you think the 1809 would be ok for that? Just trying to find the best place to source them from at the moment. Best I've found for the VTKBA6T-24 kit at $418 delivered is ebay, and Intune MS at $419 delivered for the 1808 springs only. This is where I was getting the info from. Just noticed their listing here is with the standard retainers for both, but the kit VTKBA6T-24 with 1809 springs comes with the retainers that are actually +40 thou giving the 105lb install pressure. http://www.crowcams.com.au/ShopbyProduct/tabid/92/ProdID/15638/CatID/319/VALVE_SPRING.aspx http://www.crowcams.com.au/ShopbyProduct/tabid/92/ProdID/15640/CatID/319/VALVE_SPRING.aspx Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now