Typhoon Member 564 Member For: 20y 1m 25d Gender: Male Posted 30/04/18 10:50 AM Share Posted 30/04/18 10:50 AM On 4/21/2018 at 5:36 PM, Puffwagon said: Apparently they fit with modification to the turbine housing. Still, Garrett is saying that the turbine wheel is different...Maybe they don't know what they made?! I can confirm that the GTX3584RS will fit the Ford 1.06 turbine housing. The housing needs to be machined out at the turbine inducer side by 4mm and then it will fit. The specs are incorrect on the Garrett website (maybe deliberately). It uses a different turbine and compressor wheel and also has different trim values. It's a genuine upgrade from a GTX3582R, more flow potential on both hot and cold side of the turbo in a 35 frame package. I just bought one for my new engine build, should spool just as fast if not faster then a 3582, and make more boost everywhere too. Looking forward to taking this to 600RWKWs Link to comment Share on other sites More sharing options...
Zlat347 Member 56 Member For: 6y 6m 28d Posted 30/04/18 12:12 PM Author Share Posted 30/04/18 12:12 PM that's really interesting.... who you getting to machine the 4mm for you? Have you already done it or are they messurements you have taken at home? Link to comment Share on other sites More sharing options...
Typhoon Member 564 Member For: 20y 1m 25d Gender: Male Posted 30/04/18 07:46 PM Share Posted 30/04/18 07:46 PM loca turbo shop mate Link to comment Share on other sites More sharing options...
Gabbo_32 Member 69 Member For: 10y 6m 27d Gender: Male Location: SE Melbourne, Victoria Posted 30/04/18 10:25 PM Share Posted 30/04/18 10:25 PM 11 hours ago, Typhoon said: I can confirm that the GTX3584RS will fit the Ford 1.06 turbine housing. The housing needs to be machined out at the turbine inducer side by 4mm and then it will fit... Will fit a 1.06 rear housing, but way too much back pressure if keeping the internal gate. External gate setup should be ok. The turbine wheel is something of interest. 9 blade and the profile keeps alot of the weight of the wheel closer to the center near the bearing so not to load it up too much. Procharge in Sunbury now offer turbine wheel that is almost identical, they spent a bit of time doing the R&D and then comparing with the 3584RS wheel I believe. 1 Link to comment Share on other sites More sharing options...
Zlat347 Member 56 Member For: 6y 6m 28d Posted 01/05/18 12:20 AM Author Share Posted 01/05/18 12:20 AM 13 hours ago, Typhoon said: I can confirm that the GTX3584RS will fit the Ford 1.06 turbine housing. The housing needs to be machined out at the turbine inducer side by 4mm and then it will fit... Were did u buy the supercore? Cant find one anywhere? Link to comment Share on other sites More sharing options...
Typhoon Member 564 Member For: 20y 1m 25d Gender: Male Posted 01/05/18 01:37 AM Share Posted 01/05/18 01:37 AM would have go external gate!! I can help you with a super core if you need one send me a PM and I’ll point you in the right direction. I though you wanted to go vband? maybe you should just get a complete unit? Link to comment Share on other sites More sharing options...
Zlat347 Member 56 Member For: 6y 6m 28d Posted 01/05/18 11:01 AM Author Share Posted 01/05/18 11:01 AM If anybody needs a genuine garrett brand new 1.06 rear t3 and vband out suited for external gate use. pm me. Pic attached. Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,860 Member For: 9y 9m 19d Gender: Male Location: South Australia Posted 01/05/18 11:15 AM Share Posted 01/05/18 11:15 AM Is that from a gt/gtx or an rs? Link to comment Share on other sites More sharing options...
Zlat347 Member 56 Member For: 6y 6m 28d Posted 01/05/18 11:29 AM Author Share Posted 01/05/18 11:29 AM The part number is for all gt35 frame sizes. So will suit from gtx3576r to gtx3582r Link to comment Share on other sites More sharing options...
FG50T Member 568 Member For: 20y 9m 4d Gender: Male Location: Melbourne Posted 09/05/18 08:56 AM Share Posted 09/05/18 08:56 AM Just to throw a curve ball at you. GT4294 with a 1.15 housing. Drivabilty was absolutely beautiful... won't make more than 500rwkw because it's the smaller frame 42 but with a loose converter it's better to drive imo than a 35 with a car of your weight. A friend of mine has a barra with a standard bf turbo on it motor in his VL and with a th400 and it lights tyres at any speed anytime. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now