Boosturd Member 60 Member For: 8y 11m 3d Posted 23/04/18 11:24 AM Author Share Posted 23/04/18 11:24 AM Just plumbed back into my intake. I was an idiot and ripped my rubber breather hose so my old man rigged up a bit of garden plumbing stoppered up with a bolt Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 9m 18d Posted 23/04/18 12:31 PM Share Posted 23/04/18 12:31 PM Nice stoppered haha Link to comment Share on other sites More sharing options...
BoostedG6E Member 107 Member For: 6y 9m 14d Gender: Male Location: Melbourne Posted 05/01/19 11:13 PM Share Posted 05/01/19 11:13 PM Hey mate, how are you finding the KPM intank setup? Have any issue with it yet? I’m looking at getting one just haven’t heard from people actually using them. Link to comment Share on other sites More sharing options...
Boosturd Member 60 Member For: 8y 11m 3d Posted 06/01/19 12:09 AM Author Share Posted 06/01/19 12:09 AM Absolutely love it. Have had the tank down to 40km to empty and no issues with a full boot. Whisper quite and wouldnt even know that its there!I was hesitant to get one at first as I had the same thoughts, had not seen many people using them. Would highly recommend and if your power levels exceed what the pump is capable of delivering, it could always act as a kickass lift pump for a more capable external surge Link to comment Share on other sites More sharing options...
Boosturd Member 60 Member For: 8y 11m 3d Posted 25/03/19 04:11 AM Author Share Posted 25/03/19 04:11 AM Have been pretty quite for the past few months so thought would drop an update. Gave the girl a 1,000km overdue service and checked under the car. A bit of scraping on the flanges of my 4" exhaust but other than that pretty tidy. Checked my catch-can I installed about 11,000km ago. Pretty much dry... A small amount of residue in the top but nothing in the sump. Have not checked my intake to see if that has a film. Note, this is not connected in line with my PCV valve. Turbo is still hanging in there and has had no change in noise on start-up / shutdown which has been good and still drives the same. Other than that, quite on the car scene while money gets filtered into a house... 1 Link to comment Share on other sites More sharing options...
Jgreenhalgh92 New Member 1 Member For: 4y 9m 24d Posted 16/04/20 05:50 AM Share Posted 16/04/20 05:50 AM Hey mate I know this is an older thread now but how do you find the malwood op3+ holding up to 400rkw mal assures me these are rsted to 410 kw and has some cars with more holding on with that clutch, I just put one in my fg running 340 at the wheels but I wouldnt mind touching the 400 club in the nesr future Link to comment Share on other sites More sharing options...
Boosturd Member 60 Member For: 8y 11m 3d Posted 16/04/20 05:55 AM Author Share Posted 16/04/20 05:55 AM Been meaning to do an update but been a bit busy building a house, studying, working etc... hopefully will have time soon!Clutch hasnt missed a beat and has never slipped on me. The car doesnt get thrashed though and havnt really put the clutch through much punishment other than a few short power skids. Ive heard reports of the opt 3+ holding 450rwkw if its treated well. Will test this theory when eventually upgrading to a precision 6466 in the next few years 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,199 Member For: 16y 9m 26d Gender: Male Location: Melbourne Posted 16/04/20 05:58 AM Share Posted 16/04/20 05:58 AM 2 minutes ago, Boosturd said: other than a few short power skids that's all Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now