red80 New Member 12 Member For: 7y 4m 28d Posted 04/04/18 05:48 AM Share Posted 04/04/18 05:48 AM I'm running a BF turbo engine for an engine conversion and need to calibrate the coolant temp and oil temp to the Haltech ECU. Does anyone have the resistance charts for these? I.e. 0 deg = 10ohms - 80 deg = 0ohms or whatever it may be Link to comment Share on other sites More sharing options...
HI PSI Member 1,586 Member For: 18y 6m 22d Gender: Male Location: Central Queensland Posted 08/04/18 01:04 PM Share Posted 08/04/18 01:04 PM I installed new AEM sensors for this exact reason. I seem to remember my wiring guy saying something about them being GM style sensors. Could be wrong though, as it was a while ago. 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 18d Gender: Male Location: South Australia Posted 08/04/18 01:15 PM Share Posted 08/04/18 01:15 PM Whoops I did mean to do some digging but I forgot. 7 minutes ago, HI PSI said: I installed new AEM sensors Yeah I was going to suggest just buying new sensors as running 12 year old sensors on a new build/ecu is just not what you should do. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 24d Gender: Male Location: Perth Posted 08/04/18 03:21 PM Share Posted 08/04/18 03:21 PM Sensors could be new and being used for ease of installation? Eot is in the linked doc interesting the Cht is not listed. https://www.dropbox.com/s/dmw5g4n2yek2ir8/303-14 Powertrain Control Management.pdf?dl=0 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 18d Gender: Male Location: South Australia Posted 08/04/18 03:24 PM Share Posted 08/04/18 03:24 PM That they could be. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 20d Gender: Male Location: Perth Posted 08/04/18 04:34 PM Share Posted 08/04/18 04:34 PM There is no coolant temp. The sensor doesnt touch liquid. Its head temperature.. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 24d Gender: Male Location: Perth Posted 09/04/18 12:38 AM Share Posted 09/04/18 12:38 AM CHT = cylinder head temp r r Ron. Either way they don't list specs for it Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,972 Member For: 9y 10m 18d Gender: Male Location: South Australia Posted 09/04/18 03:01 AM Share Posted 09/04/18 03:01 AM The mighty car mods dudes used a haltech in their barra cressida with the factory wiring harness. Turbo Yoda sorted out the harness and they got it tuned at Castle Hill Performance. You could email any or all of these guys and I don't see why they wouldn't help you out. Of course you could just plot your own curves. Nothing that a multi-meter, a freezer and a pot of water on the stove wouldn't fix. Here is a discussion about that kind of stuff. Link to comment Share on other sites More sharing options...
red80 New Member 12 Member For: 7y 4m 28d Posted 12/04/18 05:15 AM Author Share Posted 12/04/18 05:15 AM oil temp easy swapped if need be but head temp is a brand new sensor as they are a pain to get to if it fails Haltech use GM style sensors but by the time you buy a bunch of them they add up. Trying to spend money in the right areas without going overboard with new everything. Was going to plot the temps as suggested with a spare sensor and I figure the oil temp would give a good indication of engine temp. Does the Barra actually have a sensor for coolant? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 20d Gender: Male Location: Perth Posted 12/04/18 05:40 AM Share Posted 12/04/18 05:40 AM (edited) No, Why dont you use a VDO sensor and run it into the coolant in the top hose. https://vdo-webshop.nl/en/34-temperature-sensors Edited 12/04/18 05:46 AM by arronm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now