elapxidi Member 62 Member For: 13y 8m 14d Posted 26/02/18 11:56 AM Share Posted 26/02/18 11:56 AM (edited) Hello I took off pretty hard then went bang,I thought it was the tail shaft cause it sounded like that after the bang but it didn’t drop, no forward or reverse gears and when the car is idling it makes a nice crunching noise when I try park. What do use reckon? it just happened 30mins ago I haven’t searched forums as yet Edited 26/02/18 11:58 AM by elapxidi Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,236 Member For: 16y 10m 6d Gender: Male Location: Melbourne Posted 26/02/18 12:26 PM Share Posted 26/02/18 12:26 PM input shaft, probably... either way, not going to be cheap unless it's under warranty 1 Link to comment Share on other sites More sharing options...
4321 Bronze Donating Members 257 Member For: 10y 10m 20d Posted 26/02/18 08:01 PM Share Posted 26/02/18 08:01 PM Could be the flex plate (auto's 'flywheel') behind the motor. Iv'e seen them shatter & make that noise as the jagged edge's try to engage each other, Either way its gearbox out. If it's that the flex plate is cheap new, Intune do a strengthened one or Atomic do a billet one (around $600 for a top shelf one) Link to comment Share on other sites More sharing options...
elapxidi Member 62 Member For: 13y 8m 14d Posted 27/02/18 07:16 AM Author Share Posted 27/02/18 07:16 AM Thanks guys Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 16d Gender: Male Location: Adelaide Posted 27/02/18 08:32 AM Share Posted 27/02/18 08:32 AM It’s your half shaft cheers Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 3m 20d Gender: Male Location: Perth Posted 27/02/18 09:45 AM Share Posted 27/02/18 09:45 AM Does the tailshaft turn when you are in gear?? Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,435 Member For: 15y 1m 22d Gender: Male Location: Melbourne Posted 27/02/18 11:09 AM Share Posted 27/02/18 11:09 AM crawl under and look :/ when my input shaft went bang there was no grinding or crunching noises Link to comment Share on other sites More sharing options...
elapxidi Member 62 Member For: 13y 8m 14d Posted 02/03/18 07:59 AM Author Share Posted 02/03/18 07:59 AM Thanks guys I will check it out soon nice one On 2/27/2018 at 7:32 PM, JETURBO said: It’s your half shaft Hi mate what’s a half shaft Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,236 Member For: 16y 10m 6d Gender: Male Location: Melbourne Posted 02/03/18 08:10 AM Share Posted 02/03/18 08:10 AM when people say "half-shaft" on these cars they usually mean the shaft between the diff and rear hub... basically the "axles" on an IRS falcon. Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,435 Member For: 15y 1m 22d Gender: Male Location: Melbourne Posted 02/03/18 09:29 AM Share Posted 02/03/18 09:29 AM those would most likely snap on the track no ? I cant see those going on the street Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now