Jump to content

Brake pad and rotor suggestions


TheChad90

Recommended Posts

  • WOT?
  • Moderating Team
  • Member For: 11y 9m 22d
  • Gender: Male
  • Location: Frankston, 3199
2 minutes ago, Box stock T. said:

when they were warmed up

 

That's my issue - 99.9% of my driving is in suburbia, stop signs, traffic and roundabouts - <60km/h stop/start

 

Day to day I miss the cold, "slow speed" bite

 

It's what made me move on from the stock setup before the 1st service - felt like I had to brake, then brake again or overshoot the intersection.

 

I was coming from a Pajero :S

 

Ultimates gave me what I was after (expecting/should have been stock)

 

Pmu's may be a better pad, but they lost the stop sign, 40km/h feel - went back to the having to the "have to push again/further/quicker feel"

 

Not sure if the above ^^ will make sense to anyone, but it's my thoughts from when I was chasing what I was after.

Link to comment
Share on other sites

  • Member
  • Member For: 9y 8m 11d

Yep I hear what ya saying mate.

It's hard to find and brake pad for daily driving and expect it to respond like a set of supercar pads.

Mine phoon was a my second car so it was easy to live with the traits of a semi race style pad. There definitely another option to include along with ultimates and 400's and the ferrodo pads mentioned earlier.

Link to comment
Share on other sites

  • WOT?
  • Moderating Team
  • Member For: 11y 9m 22d
  • Gender: Male
  • Location: Frankston, 3199
2 minutes ago, Box stock T. said:

It's hard to find and brake pad for daily driving and expect it to respond like a set of supercar pads.

It's hard being a daily driver and to pretend to be a supercar driver :P

 

I think I've done a cruise or two with the (gran)baby seat still in the car lol - they make me take it out at scruitineering on track days

 

Not 18 anymore - if the rims get dusty then the folks at the bowls club know I've been having fun

 

Haven't found a time where the brakes grip less than the tyres do yet - til then, it's all just feel

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 5m 26d
  • Gender: Male
  • Location: Perth,WA

I have to agree with what you  are saying about the initial bite but when my missus jumps in the car from her barina my head almost always goes thru the front window for the first couple of stops haha. I dont think I could handle more bite

  • Like 1
Link to comment
Share on other sites

  • WOT?
  • Moderating Team
  • Member For: 11y 9m 22d
  • Gender: Male
  • Location: Frankston, 3199

Lol.

 

I'm the other way.

 

Would jump in mums Golf and headbutt the steering wheel.

 

From the Pajero I'd been driving I wasn't expecting a "worse" street braking feel - stock FG was far worse

 

T2's and the Bendix's fixed that (probably just the pads) - made the car feel how it should have.

 

Have chased improvements since

 

Different pads, rotors etc.

 

Happy again with ultimates (on 380?? rotors, but it's the pads that make the difference on stopping)

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 5m 26d
  • Gender: Male
  • Location: Perth,WA

Yeah first mod I did was get rid of the crap stock brakes on the fg. How can a car that is both fast and heavy be so under braked.

Have you looked into braided lines? I feel as if they get overlooked despite the benefits they give

Link to comment
Share on other sites

  • WOT?
  • Moderating Team
  • Member For: 11y 9m 22d
  • Gender: Male
  • Location: Frankston, 3199

Brakes and suspension would be the 1st things I'd do if I had my time again.

 

Power's for occasional, stopping is for comfort, handling is for fun - everyday.

 

Get them all balanced and everything works :) Stock is so out of balance :( 

 

Have had braided lines since my 2nd bike in the early 90's - it's subtle, but it's there.

 

Still can't brake harder, take off quicker or comer faster than the rubber you're running allows you to - decent tyres are still the limiting factor

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 9m 21d
  • Gender: Male
  • Location: Perth
Before they glaze or run out?
They would just lose their ability to pull the car up. Pedal went to mush. Mechanic had just serviced it and put in fresh penrite racing brake fluid for me.

Each time I came off the 3 fast laps 1 cool down lap smoke was wafting out of them. This was a pretty short tight track (collie), little time to cool down the brakes before you were slamming them on again.
Wouldn't buy again.
Link to comment
Share on other sites

  • WOT?
  • Moderating Team
  • Member For: 11y 9m 22d
  • Gender: Male
  • Location: Frankston, 3199

That'll be brake fade - nothing to do with the pads.

 

Brake fluid got too hot.

 

If you find any pads that don't do the same on the same track then it's because they grip less and slow you down less.

 

You're blaming the wrong part of the mix for why your brakes stopped working.

 

The pads were probably the only thing left at the time that was doing it's job correctly

 

Regardless of brand.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'