Brendo0161 New Member 2 Member For: 7y 1m 5d Posted 15/11/17 12:45 PM Share Posted 15/11/17 12:45 PM Hey, I have a BA mk2 turbo and I noticed about a month ago the turbo was fluttering when I drove it hard. The car HAD just the factory diverter valve installed. So I assumed this was on the way out (being a 2004 car) and I bought an atmospheric BOV for the sound and to hopefully stop the fluttering. The BOV is nothing special, just a $40 one off eBay that said it was compatible with my car. I put it on yesterday and no matter how I adjust the spring, under high boost, the turbo will flutter. This is the part that confuses me when I sit at 1700 revs I can hear the BOV is open no matter how stiff or soft the spring is but then I also assume it isn't opening enough when I come off the throttle, pushing air back into the turbo and making it flutter. The flutter only occurs when I floor it. Otherwise the bov will vent correctly. So I was wondering; is the issue something like the bov not being wide enough? did I jump the gun on assuming the turbo flutter was an issue? (I've heard some cars just do it) should I try a different spring and lubricate the piston of the bov? Or just bite the bullet and get a decent one? Any help would be appreciated, cheers Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,043 Member For: 16y 8m 11d Gender: Male Location: Melbourne Posted 15/11/17 01:25 PM Share Posted 15/11/17 01:25 PM Which BOV did you buy? You want a recirculating BOV if you want it to be as quiet as possible. If you like the psht sound of vent to air then that's fine too. Link to comment Share on other sites More sharing options...
Box stock T. Member 1,384 Member For: 9y 8m 13d Posted 15/11/17 01:32 PM Share Posted 15/11/17 01:32 PM Plumb it up correctly with a decent turbo smart bov and it will sound a little bit louder than a stock ford bov. Link to comment Share on other sites More sharing options...
Brendo0161 New Member 2 Member For: 7y 1m 5d Posted 15/11/17 02:03 PM Author Share Posted 15/11/17 02:03 PM 37 minutes ago, k31th said: Which BOV did you buy? You want a recirculating BOV if you want it to be as quiet as possible. If you like the psht sound of vent to air then that's fine too. Sorry, should have linked it: https://www.ebay.com.au/itm/New-Dual-Port-Blow-Off-Valve-DIRECT-BOLT-ON-XR6-Turbo-BA-BF-FG-BOV-Dump-25mm-FPR/172620426633?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 19d Gender: Male Location: Western Sydney Posted 15/11/17 08:34 PM Share Posted 15/11/17 08:34 PM The OEM valve will be the quietest one you'll find. Just make sure its plumbed correctly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now