BAXRTUTE Gold Donating Members 2,639 Member For: 8y 9m 11d Posted 28/10/17 10:04 AM Share Posted 28/10/17 10:04 AM (edited) 2 hours ago, Puffwagon said: There we go, fixed Yeah u can run a stock cooler and get 1 burst of power every 5 minutes I guess. 200km old valve springs? Id replace them.... @MBAF he doesnt need those mods at that power level(300rwkw).... though its best to fit bolt-ons yo support 400rw to not strain the block..... So in other words, do those mods ONCE AND RIGHT then enjoy it. His first QUESTION was what he should do to reach SAFE 300rw on a daily... He needs a dump pipe yeah? Cat? 200km block.... valve springs? Id suggest flapper.... and a 8psi actuator, and a upgraded trans cooler mite help the zf. But yeah we can say, just ramp it up with minimal support and she'll be sweet as. Edited 28/10/17 10:05 AM by BAXRTUTE Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 29d Gender: Male Location: Adelaide Posted 28/10/17 10:06 AM Share Posted 28/10/17 10:06 AM Don’t modify the vehicle as you “probably” dont want to spend the right amount of money to do it correctly and then will be less than happy when already ageing parts start to wear at an increasingly ridiculous rate from the new found power output round 1 in any turbo falcon is the biggest gain for $ round 2 and 3 cost lots more for less skip to round 4 ( E85 ) and you’re back to kicking goals for the $ outlaid haha early signs of a wearing ZF is the lack of output vs input when manually selecting gears and anything that “flares” once up to operating temps 2 Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro...tbh ;) 8===} Gold Donating Members 16,078 Member For: 10y Gender: Male Location: South Australia Posted 28/10/17 10:22 AM Share Posted 28/10/17 10:22 AM 15 hours ago, BAXRTUTE said: Yeah u can run a stock cooler and get 1 burst of power every 5 minutes I guess. Nothing wrong with that But these guys do have valid points regarding the age of vehicle and spending the right amount of money to make sure the vehicle isn't over stressed. There's more than one way to skin a cat 1 Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 9m 11d Posted 28/10/17 11:04 AM Share Posted 28/10/17 11:04 AM Being 200km old and im guessing still using the ford trans cooler? @adams355 maybe a new aftermarket trans cooler and Zf tune mite sort it out?? But totally agree with everything your posting. Unless his willing to do it right?? @adams355 his better off leaving it as is. 1 Link to comment Share on other sites More sharing options...
Puffwagon Trust me bro...tbh ;) 8===} Gold Donating Members 16,078 Member For: 10y Gender: Male Location: South Australia Posted 28/10/17 11:08 AM Share Posted 28/10/17 11:08 AM If the trans cooler is that old I'd swap it immediately. Mine failed at 150 thousand and thankfully I caught it before water got in the trans. 1 Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 8m 28d Gender: Male Location: Brisbane Posted 30/10/17 02:05 AM Author Share Posted 30/10/17 02:05 AM Ok, I might leave it for awhile then and replace some parts first. So, what is this 'magic' formula for another 50rwkw? I only want 300 max. Thanks. Link to comment Share on other sites More sharing options...
BAXRTUTE Gold Donating Members 2,639 Member For: 8y 9m 11d Posted 30/10/17 02:48 AM Share Posted 30/10/17 02:48 AM Dump pipe and high flow cat 1k Trans cooler $500 Vavle springs 1k... though your current 200km old springs "mite" have enough life in them to hold 300rw for 6mths if u wanted to cut first up cost. That will get u to 300rw Personally id do what I suggested up the top. Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 3m 2d Gender: Male Location: Perth Posted 30/10/17 04:35 AM Share Posted 30/10/17 04:35 AM Injectors , pump and cat. Then worry about the other stuff if it's needed. 2 Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 8m 28d Gender: Male Location: Brisbane Posted 07/03/18 02:15 PM Author Share Posted 07/03/18 02:15 PM (edited) Ok finally did some work got the trans cooler in (davies craig with a fan in front of right wheel, works perfectly and the auto feels like its new again). Had it and the diff serviced, oil, plugs, everything else, modified airbox etc. Finally had a good look around the engine bay and through the XCAL and to my surprise its running a 14psi tune and a turbosmart manual boost control on what I think is the standard actuator. Hmm, must say its tuned very well, only ever heard it ping once on bad fuel. Its been doing 400km a week for quite awhile. So, I've settled on an outlaw hi flow cat converter (heard good things) some new coils and an upgraded fuel pump before the tune. So what is everyone thoughts on the manual boost control situation? I take it I will need a new actuator for 14,15,16 psi to go back to the boost control solenoid? Are there any benefits staying with the manual control It gets to max boost early. Edited 07/03/18 02:22 PM by adams355 Link to comment Share on other sites More sharing options...
adams355 Member 529 Member For: 7y 8m 28d Gender: Male Location: Brisbane Posted 16/03/18 06:12 AM Author Share Posted 16/03/18 06:12 AM Anyone, any thoughts on the manual boost control with good tune? Will the standard exhaust and cat be able to handle 14psi? I have logged it peeking at 14 and dropping off to 7. But it seems to have come good recently. No where to do the 3rd gear run but Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now