Smackers XR6T Red F6310 Member 175 Member For: 19y 3m 13d Gender: Male Location: A small country town on the Murray River South Australia Posted 28/09/14 01:06 AM Share Posted 28/09/14 01:06 AM Damn. Just goggled noisy lifters and Penrite comes up everywhere :( Oh well, see how the 10w50 goes in the morning. Ive been using the Penrite racing 15w50 every oil change in my FG F6 since the 7500km service (car now has 63000kms on it) and its still nice and quiet on cold start ups 3 Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 6m 12d Gender: Male Location: Gold Coast Posted 22/01/15 09:05 AM Share Posted 22/01/15 09:05 AM (edited) Just changed the Penrite out for Nulon again but this time went with the 5W40 fully syn as recommended by them. It was quieter in the valve train at start up but the big test will be tomorrow when I do a dead cold start. What it was doing was start pretty quietly then if you left it idle it would get what sounded like a lifter ticking around cyl 5 or 6 for a minute or so, until it got some temp. After that, quiet. I had thought it was a loose mani nut but no joy. Edited 22/01/15 09:10 AM by Bomber 1 Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 7m 16d Gender: Male Location: A big bridge over a river in South Australia Posted 22/01/15 10:37 AM Share Posted 22/01/15 10:37 AM Report back please Bomber 1 Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 6m 12d Gender: Male Location: Gold Coast Posted 22/01/15 01:07 PM Share Posted 22/01/15 01:07 PM Will do. Link to comment Share on other sites More sharing options...
genuine honest person Member 2,769 Member For: 10y 9m 26d Gender: Male Location: near brisbane Posted 24/01/15 03:47 AM Share Posted 24/01/15 03:47 AM (edited) about 3 weeks ago I changed to 20w 60 penrite tenth pao ester . at start up the oil pressure is at idle about 40 psi ,and will not drop till about 10 klm of driving . only changed to the heavier oil for powerplay 7 february . at normal temp the oil pressure at idle is now at 23 psi where it used to sit with penrite 15 50 pao ester at 18 psi .and after every run at powercruise last september dropped all the way to 3-5 psi at idle Edited 24/01/15 03:47 AM by gunna Link to comment Share on other sites More sharing options...
furiousgibbon Member 86 Member For: 17y 3m 4d Posted 03/02/15 12:24 PM Share Posted 03/02/15 12:24 PM If yours is a mk2 they have put the correct oil in... mk2 are specified as 5w30 but most oil manufacturers 10w30 meets the ford spec and is cheaper so they put that inI realise this post was made nearly 2 years ago but just looking to do an oil change at 22500, I just looked in the service booklet for my 2014 and it says 15w40 Castrol GTX Professional mineral oil. Anyway I'll get back in my box and keep reading. Link to comment Share on other sites More sharing options...
"Captain Retard" Member 1,417 Member For: 10y 6m 21d Gender: Male Location: Shellharbour NSW Posted 03/02/15 08:53 PM Share Posted 03/02/15 08:53 PM Opinions about which oil to use are like arseholes.......everybody's got one 2 Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 6m 12d Gender: Male Location: Gold Coast Posted 05/02/15 10:01 AM Share Posted 05/02/15 10:01 AM Report back is on my build thread. Link to comment Share on other sites More sharing options...
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 11y 3m 17d Gender: Male Location: Adelaide Posted 02/04/15 05:34 AM Share Posted 02/04/15 05:34 AM What oil are peole using in their power steering pump Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 22d Gender: Male Location: Western Sydney Posted 02/04/15 09:24 AM Share Posted 02/04/15 09:24 AM Some penrite power steering fluid. Was all the local repco had for the FGs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now